Results 1 to 6 of 6
  1. #1
    Join Date
    May 2011
    Location
    At The Office
    Posts
    97

    Honeywell Zone Manager

    My Fellow Honeywell Control Engineers and Techs,

    Does anyone have a wiring or installation guide for the Excel 10 Q7750A ZONE MANAGER? Specifically where C-Bus ties in and where E-Bus (LON) ties in.

    Thank you,
    The Cisco Kid

  2. #2
    Join Date
    Apr 2007
    Location
    San Diego, CA
    Posts
    1,337
    http://customer.honeywell.com/techli...0s/95-7509.pdf
    wiring diagram on page 6

    Cheers,
    -Digo

  3. #3
    Join Date
    May 2011
    Location
    At The Office
    Posts
    97
    Digo,

    Thanks mate.

    Cheers,
    The Cisco Kid

  4. #4
    Join Date
    Dec 2008
    Location
    New England
    Posts
    166
    Look on the inside of the cover............

  5. #5
    lol inside the cover, good answer!!!!

    but take to not power off the zone manager so long. If not you will lose the memory...

  6. #6
    Join Date
    Jan 2005
    Location
    USA
    Posts
    1,459
    Replace the battery if you do not know its age and then you will not lose memory when you remove the cover.
    "It's always controls"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event