copeland motor

[codgy]

I need a hand finding the correct condenser motor for an old copeland brand 5hp condensing unit. Missing model plate, it uses a mra2-050a-tfc compressor w/ a 6 blade 24", 27 deg. pitch fan. It currently has a 1075 rpm motor pullling 5.3 amps (3/4hp). Motor is only rated for 4.4 amps. I believe this unit started out w/ lower rpm motor. Sorry no pic but this unit uses twin receivers under the compessor. Please let me know what I need to fix this. Thanks

[ararams]

I think you are looking at mod#C2AL-0502-TFC Motor part# 050-0252-00. If memory serves me right that fan blade is a five paddle blade,the correct part # is 083-0115-00

[codgy]

No it is a 6 blade fan and about 30 years old by the looks of it. I believe olriginal was lower rpm.

[powell]

I need a hand finding the correct condenser motor for an old copeland brand 5hp condensing unit. Missing model plate, it uses a mra2-050a-tfc compressor w/ a 6 blade 24", 27 deg. pitch fan. It currently has a 1075 rpm motor pullling 5.3 amps (3/4hp). Motor is only rated for 4.4 amps. I believe this unit started out w/ lower rpm motor. Sorry no pic but this unit uses twin receivers under the compessor. Please let me know what I need to fix this. Thanks

I believe the unit is a: C3AL-0500-CFB R502 LT

The original motor was a: 050-0234-00 - 1/3 HP - 825 RPM.

The original blade was a: 24"-CW-6BLDE- 34 degree

[icemeister]

I believe the unit is a: C3AL-0500-CFB R502 LT

The original motor was a: 050-0234-00 - 1/3 HP - 825 RPM.

The original blade was a: 24"-CW-6BLDE- 34 degree

There's your answer.... 825 RPM.

[powell]

I believe the unit is a: C3AL-0500-CFB

Sorry, I erred, it's "TFC".