Results 1 to 5 of 5

Thread: tube plugs

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    pennsylvania
    Posts
    121

    tube plugs

    Used my first two piece tube plug today. I have always used just the plug in the past with good success. Any thoughts on the two piece would be appreciated.
    Thanks

  2. #2
    Join Date
    Aug 2006
    Location
    Columbus Ohio
    Posts
    1,980
    A lot less to screw up with the two piece vs the solid. Better grip IMO.

    Easy as pie wasn't it?
    UA LU189

    10mm, because it's better than .45acp

  3. #3
    Join Date
    Feb 2012
    Location
    utah
    Posts
    106
    just make sure you have the exact size and they work fine.

  4. #4
    Join Date
    Mar 2004
    Location
    Windsor ON Canada
    Posts
    402
    Need to have the end of the tube faced flush with the tube sheet so that the shoulder of the plug seats properly. Have used both and prefer the two piece.

  5. #5
    Join Date
    May 2011
    Location
    Gateway to the west
    Posts
    21

    Tube plugs

    I have been using the 2 piece plug for over 25 yrs, have not had a
    problem with one yet. Just make sure the center pin is the right one for the plug. Just plugged 6 tubes in a York generator last week.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event