Results 14 to 22 of 22
Thread: Plumbing or electrician
05-26-2012, 05:31 PM #14
05-26-2012, 08:27 PM #15
That instructor is correct. The first thing out of my tool bag is the I-Driver, with a 4" long Irwin 5/16 nutdriver.
The next thing is the multimeter.
The point is that these units will only become more complicated, and that means more processors, boards, wire, and schematics.
The electrical license is about the NEC and the IRC. Of course, none of that teaches you about circuitry. There are electricians out there that only understand switches and receptacles.
Go to a radio shack and get one of their project electronics lab kits.
Something like this. Look how inexpensive this is, too. There are many brands, and you can search around online to find the best deal. BUT, it is a GREAT way to learn about circuits and why they work.
05-27-2012, 12:38 AM #16
To work ALONG WITH HVAC, I'd go with electrical. You'll use that knowledge much more.
If it was INSTEAD of HVAC, or as a backup career, I'd go with plumbing. Plumbing leads much more to problem solving, and making a distraught customer happy.....which, like HVAC, is a big emotional driver for many.
Comparatively, very little electrical work consists of "saving the day" for someone....unless you're into heavy controls work or something of that nature.
Technical incompetence is NOT a sales tool....
05-28-2012, 02:47 PM #17Professional Member*
- Join Date
- Jul 2010
Plumbers and electricians are one trick ponies. Service techs can and will do all things
05-30-2012, 09:19 PM #18
They all go hand in hand if you think about it. I work for a company that does it all. i may install one day. service the next do some plumbing or electrical. I never know one call from the next. I like it that way cause it keeps my day interesting.Semper Fi
05-30-2012, 09:33 PM #19Professional Member
- Join Date
- Feb 2012
- GTA, ON
In the UK you get a plumbing licence with your gas licence, but they work with hydronics a lot. Might become more prominent in North America as our energy prices reach current European levels.
06-02-2012, 11:18 AM #20Professional Member
- Join Date
- Jan 2002
- Hamburg, Pa.
I could never be a plumber.......eewww........I like chewing my finger nails!
06-02-2012, 11:57 AM #21Professional Member
- Join Date
- May 2010
The biggest difference with Plumbing and Electrical from HVAC/R is there is a big gap in the work they specialize in. Many plumbers and electricians will only do residential and never set foot in a commercial setting. Some will work on large commercial projects and only run water pipe or pull wire. Most HVAC/R guys are more well rounded in their training.
With that said though I have worked with some Plumbers that have their A gas tickets that have to teach the sparkys the low voltage control circuitry. I have also seen a Electrician trying to dumb down an explanation of how to wire a light switch to a plumber.
A plumbing company that specializes in geo, solar, boilers, steam and gas fitting will have an easier time doing HVAC that a residential guy that cleans drains.
Most electricians struggle with control wiring. If you get into a company that does controls your transition would be a lot easier than some guy that pulled wire for 4 years.
06-26-2012, 11:03 PM #22
Plumbing is just a vast area of knowledge Plumber for sure!