Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Feb 2012
    Location
    PA
    Posts
    27

    YCAS with DXS compressor..motor terminal seals

    I had a heck of a time replacing some motor terminal seals(the o-rings under the insulators) today, anyone have some advice on making this process less of a pain in the a*$??

  2. #2
    Join Date
    Dec 2003
    Location
    45th Parallel
    Posts
    954
    If it was easy.....
    ya, it is kind of a pain. I found it is easier to pull the suction cover, but you have to move the comp to do that.
    If you don't want to do that, then get some seal picks and pull the seals up with them. That actually works pretty good.
    You can do the motor terms with out removing suction suction cover, but if you have to do the temp sensor terminals I would recommend pulling cover.
    “If your work speaks for itself, don't interrupt.” ~Henry J. Kaiser

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event