|
-
19DH Chiller
Had a 19DH Chiller slugged with extremely high temperature chilled water (long story) popped the rupture disc and dumped the charge. Okay figured out the cause, replaced the rupture disc, did a complete evac. and add charge. Now the Chiller is surging hard! Condenser pressure 8 to 10, Refer pressure -10, condenser water good, CWS & CWR psi good. Before I tear it apart any suggestions?
-
Get your post count up and apply for pro membership.
This isn't a DIY site and although you don't sound like our typical DIYer you need a pro status to talk shop.
BTW- 189?
UA LU189
10mm, because it's better than .45acp
-
Don't tear it apart, thats a suggestion.
-
As ZW said, get your post count up and apply for pro status.
Why would you tear it apart?
-
No offense, but if your first reaction to a surge is "tear it apart", you need a second on-site opinion.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Subscribe to this feed
