Results 1 to 5 of 5
Thread: 19DH Chiller
-
04-10-2012, 08:30 PM #1
New Guest
- Join Date
- Apr 2012
- Posts
- 1
19DH Chiller
Had a 19DH Chiller slugged with extremely high temperature chilled water (long story) popped the rupture disc and dumped the charge. Okay figured out the cause, replaced the rupture disc, did a complete evac. and add charge. Now the Chiller is surging hard! Condenser pressure 8 to 10, Refer pressure -10, condenser water good, CWS & CWR psi good. Before I tear it apart any suggestions?
-
04-10-2012, 08:57 PM #2
Professional Member
- Join Date
- Aug 2006
- Location
- Columbus Ohio
- Posts
- 1,775
Get your post count up and apply for pro membership.
This isn't a DIY site and although you don't sound like our typical DIYer you need a pro status to talk shop.
BTW- 189?UA LU189
10mm, because it's better than .45acp
-
04-10-2012, 09:47 PM #3
Professional Member
- Join Date
- Oct 2011
- Location
- La.
- Posts
- 211
Don't tear it apart, thats a suggestion.
-
04-10-2012, 10:48 PM #4
Professional Member*
- Join Date
- Jul 2007
- Location
- The Hot South
- Posts
- 869
As ZW said, get your post count up and apply for pro status.
Why would you tear it apart?
-
04-11-2012, 08:53 AM #5
Professional Member*
- Join Date
- Aug 2009
- Location
- Prattville,Alabama
- Posts
- 1,105
No offense, but if your first reaction to a surge is "tear it apart", you need a second on-site opinion.
Reply With Quote
