Turbashed oil separator/reservoir
I had a Hussmann Super plus rack go down last night, all the compressors were off on oil.
The hand valve before the filter was restricted w/ debris, it seems as though the turbashed has "trash" in it.
My question is, when I drop the oil from it I wanted to, either replace the sightglasses, or at least, clean them.
Are there seals that need to be replaced when removing the sightglasses?, and is the screen inside replaceable?
I tried skimming the Superplus manual but didn't find any such info.
My understanding is that the turbashed is a pretty solid, self-contained unit.
Originally Posted by sprmktrefertech
I've pulled a sight glass just to look inside with a camera and was able to replace it without a new o-ring.
Originally Posted by jpsmith1cm