Super Small Balance Valves??

[madhat]

I have some Console units that are piped backwards. When I repipe them, I want to replace the Griswald (sp.) valve. I'm going to have to do the piping inside the units, so I don't have to drain the system. Need half-inch balance valves with an adjustment handle. BTW you balance these units by water temperature, in and out.

[rich pickering]

http://www.dahlvalve.com/brochure/Ba...%20English.pdf

[SolarMike]

I have some Console units that are piped backwards. When I repipe them, I want to replace the Griswald (sp.) valve. I'm going to have to do the piping inside the units, so I don't have to drain the system. Need half-inch balance valves with an adjustment handle. BTW you balance these units by water temperature, in and out.

Or Armstrong

http://www.armstrongpumps.com/presen...01&modelID=005

[Brazarabit]

very interesting thank

[zw17]

http://completewatersystems.com/prod...alance-valves/

B&G circuit setters is the only way to go IMO.