Results 1 to 10 of 10
Thread: Another new guy :)
-
03-24-2012, 10:23 PM #1
New Guest
- Join Date
- Jul 2011
- Posts
- 5
Another new guy :)
Hi Guys, I am from Jacksonville, Fl, been in the trade for about 6 years. Very happy to have found this site
-
03-24-2012, 10:25 PM #2
Professional Member*
- Join Date
- Feb 2010
- Location
- In a boiler room
- Posts
- 6,330
Welcome here!
You will need Pro membership to see the real stuff! See my sig line to apply once you reach 15 posts.
-
03-24-2012, 10:27 PM #3
New Guest
- Join Date
- Jul 2011
- Posts
- 5
Thank you!
Originally Posted by chuckcrj
-
03-24-2012, 11:19 PM #4
Professional Member
- Join Date
- Mar 2007
- Location
- Home of the newly wed and the nearly dead
- Posts
- 2,938
Welcome to the forum! Stick around, there's lots of cool people who are willing to share their knowledge and experience. What kind of work do you do up there in Jax?
Truth is still truth, even if no one believes it. A lie is still a lie, even if everyone believes it.
"It's called the american dream because you have to be asleep to believe it" -George Carlin
"A nation of sheep begets a government of wolves" -Edward R. Murrow
"I have problems just like you. One time, my dancing horse almost fell into my car elevator" -Mitt Romney
Buy american made goods & support locally owned businesses!
-
03-25-2012, 08:50 AM #5
New Guest
- Join Date
- Jul 2011
- Posts
- 5
Mostly heatpumps, very rarely gas furnaces
-
03-25-2012, 08:53 AM #6
Professional Member*
- Join Date
- Jul 2001
- Location
- Gold Coast of Connecticut
- Posts
- 4,407
Welcome to the forum........keep posting and apply for pro.
Lots os good stuff on this site.Aire Serv of SW Connecticut- Gas heat, dual fuel and central a/c systems installed and serviced
-
03-26-2012, 09:50 PM #7
New Guest
- Join Date
- Jul 2011
- Posts
- 5
I know this was just my intro post, but can you guys point me towards a good reliable pipe clamp thermometer?
-
03-26-2012, 11:01 PM #8
Professional Member
- Join Date
- Mar 2007
- Location
- Home of the newly wed and the nearly dead
- Posts
- 2,938
Fluke and Cooper are the industry standards, but Fieldpiece also makes a nice, inexpensive one called the ATC1. However, I think they are making them a little cheaper these days and I think they may have changed the design in the last couple of years.
Truth is still truth, even if no one believes it. A lie is still a lie, even if everyone believes it.
"It's called the american dream because you have to be asleep to believe it" -George Carlin
"A nation of sheep begets a government of wolves" -Edward R. Murrow
"I have problems just like you. One time, my dancing horse almost fell into my car elevator" -Mitt Romney
Buy american made goods & support locally owned businesses!
-
03-26-2012, 11:02 PM #9
Professional Member
- Join Date
- Mar 2007
- Location
- Home of the newly wed and the nearly dead
- Posts
- 2,938
You can also search the forums using the search feature at the top of the page. Or you can go to Tools and Test Equipment and start a new thread, and you will probably get more relevant responses.
Truth is still truth, even if no one believes it. A lie is still a lie, even if everyone believes it.
"It's called the american dream because you have to be asleep to believe it" -George Carlin
"A nation of sheep begets a government of wolves" -Edward R. Murrow
"I have problems just like you. One time, my dancing horse almost fell into my car elevator" -Mitt Romney
Buy american made goods & support locally owned businesses!
-
03-26-2012, 11:26 PM #10
Professional Member
- Join Date
- Feb 2012
- Location
- New Jersey
- Posts
- 26
the fieldpiece meters are definatly made cheeper. The knob have broken off two of mine and i switched back to fluke
Reply With Quote
