WTB: ENC-420 or 520
I am looking for a used ENC 520 or 420 to play around with. Maybe you have one that has a bad port, or something like that. Maybe one that needs recapped, or needs a new xfmr or the like.
I am just getting started in controls, and was looking for an ENC that I can set up a station on to play around with, work with graphics, and just to mess around with in general without worrying about destroying a live site with my experiments.
Don't want to spend too much......
Schneider Electric I/A Series, Schneider Electric SmartStruxure/SmartStruxure Lite (Certified in both), Niagara R2/AX technician (Certification in AX only), and Andover/Schneider Continuum system engineer/administrator.
Do it right the first time, and you will not have to do it again.
When all else fails... Get a bigger hammer!!