Bypassing Hi/Low pressure cut offs

[dlove]

really, whats the worst thing that could happen..comp will trip overload or the breaker...worse case your comp will plow the internall relief or if its a bigger system blow the relief and there goes a few hundred lbs.....doubt its gonna hurt anyone not like jumpin a limit on a gas fired appliance
still not reccomended by me, but i doubt its gonna hurt anyone

maybe not physically hurt someone, but if a service provider jump out a safety and my unit blew up. That vendor would buy my a new unit. regardless of the age of the unit, the hurt comes from not having a job or a bad rep.

My advice, record everything, do it right and inform the customer, if you cant fix it before you leave lock it out or pull the fuses

[beenthere]

How long does it take to add a tee and another switch anyways? What about 10 minutes? The cost for equals? not much.....

And the strange thing is. The customer will pay you to do that.

[ORV]

CF motor failing and the high side wasn't elevated?

Fan was eventually going out on overload. The maintenance guy would notice it and reset high pressure and walk away. When I pulled the motor all of the oil was leaked our of it.

[hurtinhvac]

Assuming the old has no schrader core, add an access tee with a core depressor, attach switch and call it done

As others have said that is a call you need to make, supply houses are generally open the next day here

No schrader? Holy crap...this is why it pays to hang out here!

Anyone have a picture of this tee handy?

[Chris_Worthington]

No schrader? Holy crap...this is why it pays to hang out here!

Anyone have a picture of this tee handy?

Here ya be http://www.rsd.net/search/item.php?i...=JB+A31851-100

[hurtinhvac]

Here ya be http://www.rsd.net/search/item.php?i...=JB+A31851-100

Thank you.