Results 1 to 2 of 2
  1. #1
    Join Date
    May 2008
    Location
    SouthEast
    Posts
    320
    Post Likes

    odd jace 2 issue

    I have a jace 2 sitting sitting here that won't connect to the station or platform with the serial shell jumper in the normal position, but if I remove the jumper I can access the station and platform on one of the ethernet ports... Anyone else ever had a jace do something like this. If you have, were you able to get the jace to operate appropriately?

  2. #2
    Join Date
    Jun 2012
    Posts
    79
    Post Likes
    I had one doing something slightly different. It would only allow access to the station/platform if the jumper was in the serial shell position. Wiped it out via serial shell. That seemed to solve the issue for me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Quality Home Comfort Awards