Page 1 of 2 12 LastLast
Results 1 to 13 of 17
  1. #1
    Join Date
    Apr 2007
    Location
    Tucson, Arizona
    Posts
    286

    To much wrong with this W/H

    OMG, Found this gem the other day. The picture should speak for itself.
    Attached Images Attached Images  

  2. #2
    Join Date
    Aug 2008
    Location
    San Clemente, CA
    Posts
    1,224
    Where do I begin to tell the story of a .... Some things you wish you hadn't seen. Looking at that makes me think they didn't care what you had to say about it.

  3. #3
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    that's one way to get that pesky draft hood to stop leaking CO
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  4. #4
    Join Date
    Apr 2010
    Location
    Red Deer, Alberta
    Posts
    655
    Quote Originally Posted by shavedneon View Post
    OMG, Found this gem the other day. The picture should speak for itself.
    How's this one? Hot water pressure was very low, two 40 gal gas fired water heaters run in series, the outlet from heater 1 to heater two had deposit about 1/4" thick, both thermostats nearly maximum. Cleared debris by using CLR to dissolve, then set heater 1 at 110F output and heater 2 at 140, everything is fine now...
    Attached Images Attached Images  

  5. #5
    Join Date
    Dec 2010
    Location
    Woodbridge Twp, NJ
    Posts
    1,308
    Quote Originally Posted by enb54 View Post
    How's this one? Hot water pressure was very low, two 40 gal gas fired water heaters run in series, the outlet from heater 1 to heater two had deposit about 1/4" thick, both thermostats nearly maximum. Cleared debris by using CLR to dissolve, then set heater 1 at 110F output and heater 2 at 140, everything is fine now...
    Nice picture!

    I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara?
    Every customer you take for granted today will be someone else's tomorrow.

  6. #6
    Join Date
    Aug 2009
    Location
    Prattville, Alabama
    Posts
    2,104
    Quote Originally Posted by DLZ Dan View Post
    Nice picture!

    I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara?
    Had to look twice...

  7. #7
    Join Date
    Apr 2010
    Location
    Red Deer, Alberta
    Posts
    655
    Quote Originally Posted by DLZ Dan View Post
    Nice picture!

    I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara?
    The 3 year old granddaughter's, she's the helper...

  8. #8
    speechless...

  9. #9
    Join Date
    Oct 2009
    Posts
    979
    Quote Originally Posted by shavedneon View Post
    OMG, Found this gem the other day. The picture should speak for itself.
    I keep a red tag sticking out of the front pocket of my coveralls. Seems to keep me from seeing chit like this. I call it "open carry".
    Never argue with a crazy man.

  10. #10
    Join Date
    Dec 2007
    Location
    Afton, VA / Khorat, Thailand
    Posts
    2,469
    Water heater?....lol....that's an IED.
    Tough times don't last...Tough people do.

    Midnight Sun Astrophotography

  11. #11
    Join Date
    Mar 2007
    Location
    Madison, Wisconsin
    Posts
    2,260
    Quote Originally Posted by sweat hog View Post
    I keep a red tag sticking out of the front pocket of my coveralls. Seems to keep me from seeing chit like this. I call it "open carry".
    I need to get me some Red Tags for HVAC, any ideas where to buy them?
    I r the king of the world!...or at least I get to stand on the roof and look down on the rest of yall

  12. #12
    Join Date
    Mar 2004
    Location
    Las Vegas, Nevada
    Posts
    1,647
    Quote Originally Posted by shavedneon View Post
    OMG, Found this gem the other day. The picture should speak for itself.
    Wow!
    The views and opinions posted here are my own. They do not reflect the corporate policies of my employer and will most likely get me fired at some point.

  13. #13
    What's wrong with it? You guys are way too critical. It's probably been like that for years.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event