Results 1 to 13 of 17
Thread: To much wrong with this W/H
-
03-03-2012, 07:16 PM #1
Professional Member*
- Join Date
- Apr 2007
- Location
- Tucson, Arizona
- Posts
- 64
To much wrong with this W/H
OMG, Found this gem the other day. The picture should speak for itself.
-
03-03-2012, 11:34 PM #2
Professional Member*
- Join Date
- Aug 2008
- Location
- San Clemente, CA
- Posts
- 704
Where do I begin to tell the story of a .... Some things you wish you hadn't seen. Looking at that makes me think they didn't care what you had to say about it.
-
03-04-2012, 07:49 AM #3
Professional Member*
- Join Date
- Dec 2002
- Location
- SouthEast NC ICW & Piedmont Foothills
- Posts
- 7,219
that's one way to get that pesky draft hood to stop leaking CO
It`s better to be silent and thought the fool; than speak and remove all doubt. 
-
03-12-2012, 02:57 PM #4
Professional Member*
- Join Date
- Apr 2010
- Location
- Red Deer, Alberta
- Posts
- 649
How's this one? Hot water pressure was very low, two 40 gal gas fired water heaters run in series, the outlet from heater 1 to heater two had deposit about 1/4" thick, both thermostats nearly maximum. Cleared debris by using CLR to dissolve, then set heater 1 at 110F output and heater 2 at 140, everything is fine now...
Originally Posted by shavedneon
OMG, Found this gem the other day. The picture should speak for itself.
-
03-12-2012, 03:57 PM #5
Professional Member*
- Join Date
- Dec 2010
- Location
- Woodbridge Twp, NJ
- Posts
- 1,201
Nice picture! Originally Posted by enb54
I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara?Every customer you take for granted today will be someone else's tomorrow.
-
03-12-2012, 04:59 PM #6
Professional Member*
- Join Date
- Aug 2009
- Location
- Prattville,Alabama
- Posts
- 1,108
Originally Posted by DLZ Dan
Had to look twice...
-
03-12-2012, 06:47 PM #7
Professional Member*
- Join Date
- Apr 2010
- Location
- Red Deer, Alberta
- Posts
- 649
The 3 year old granddaughter's, she's the helper... Originally Posted by DLZ Dan
-
03-12-2012, 11:10 PM #8
Regular Guest
- Join Date
- Mar 2011
- Location
- NC
- Posts
- 81
speechless...
-
03-12-2012, 11:36 PM #9
Professional Member
- Join Date
- Oct 2009
- Posts
- 878
I keep a red tag sticking out of the front pocket of my coveralls. Seems to keep me from seeing chit like this. I call it "open carry". Originally Posted by shavedneon
OMG, Found this gem the other day. The picture should speak for itself.Never argue with a crazy man.
-
03-13-2012, 04:06 PM #10
Professional Member
- Join Date
- Dec 2007
- Location
- Afton, VA / Khorat, Thailand
- Posts
- 2,453
Water heater?....lol....that's an IED.
-
03-14-2012, 10:59 PM #11
Professional Member*
- Join Date
- Mar 2007
- Location
- Madison, Wisconsin
- Posts
- 2,164
I need to get me some Red Tags for HVAC, any ideas where to buy them? Originally Posted by sweat hog
I r the king of the world!...or at least I get to stand on the roof and look down on the rest of yall
-
03-14-2012, 11:55 PM #12
Professional Member*
- Join Date
- Mar 2004
- Location
- Las Vegas, Nevada
- Posts
- 1,647
Wow! Originally Posted by shavedneon
OMG, Found this gem the other day. The picture should speak for itself.The views and opinions posted here are my own. They do not reflect the corporate policies of my employer and will most likely get me fired at some point.
-
03-18-2012, 12:44 PM #13
Regular Guest
- Join Date
- Dec 2008
- Posts
- 49
What's wrong with it? You guys are way too critical. It's probably been like that for years.
Reply With Quote
