Results 1 to 7 of 7
  1. #1
    Join Date
    Jan 2012
    Location
    australia
    Posts
    5

    Confused TXV Set up and superheat

    Hi Guys
    could someone explain or point me in the direction of some litrature on how to correctly set up a TXV in a Chiller, cool room and freezer. Also the diffrence betwenn and aplicaton of suction line and evaporator superheat and how they are measured.

    I think I know but do a good job of confusing myself.

  2. #2
    Join Date
    Jan 2012
    Posts
    42

  3. #3
    Join Date
    Jan 2012
    Location
    australia
    Posts
    5
    thanks some of that was very usfull
    I am aware of how it works I just want to know the best way to set up super heat on a chiller cool room and freezer

  4. #4
    Join Date
    Mar 2003
    Posts
    7,316
    turn the little square head on the bottom to achieve desired conditions? this asumes everything else is right though.

  5. #5
    Join Date
    May 2007
    Posts
    730
    Adjustments should be made when evaporator conditions are close to design, and condenser conditions are within normal range.

    Do any water-side or air-side work or adjustments first.
    Attached Images Attached Images

  6. #6
    Join Date
    Jan 2012
    Location
    australia
    Posts
    5
    thanks for all your help

  7. #7
    Join Date
    Mar 2012
    Location
    Connecticut
    Posts
    43
    Thanks for the Website.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event