Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2012
    Posts
    15

    IQ prestige honeywell stat

    I have a question about change over from heat pump too aux heat and back once temp drops too set point example, 75 degrees the stat says waiting for equipment and temp drops another 2 degrees before it comes on. is this normal for this stat i had a vision pro 8000 and this did not act this way.

  2. #2
    Join Date
    Feb 2012
    Posts
    15
    I have a question about change over from heat pump too aux heat and back once temp drops too set point example, 75 degrees the stat says waiting for equipment this stays on for about 20 min. and temp drops another 2 degrees before it comes on. is this normal for this stat i had a vision pro 8000 and this did not act this way.

  3. #3
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    67,700
    Something is not right.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

  4. #4
    Join Date
    Dec 2011
    Location
    PA
    Posts
    98
    Quote Originally Posted by beenthere View Post
    Something is not right.
    I agree on two counts:
    1.) There are two posts there on the same thing roughly a 1/2 hour apart...
    2.) Something is definately amuck with your setup.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event