Just installed a new machine at a Lonestar. Setup the ice thickness and ran through 1 cycle. the unit finished its harvest and then indicated i had a 'full bin' and that my water curtain was open. neither scenario was true. i reset power on unit and it started back up and did same thing.in setup menu i set binsensor option to 'none' still did the same thing. i then set it to 'bin' and then 'dispenser' which the unit doesnt have anyway. Still did the same thing. i suspect i either have a defective water curtain sensor or the sensor/magnet in door is not activating the sensor. im calling manitowoc in the morning. in the meantime anyone have any other suggestions?