http://www.waterfurnace.com/literatu...n/SC1007WN.pdf
Yes, page 31 and 32 will give you the data you are looking for.
Hello All,
I wouyld kindly ask for your opinion. Just to double check the following...
Water to water heat pump operates in heating mode. If heating source temperature is increased, more heat can be extraxted and consequently COP is increased. Do you agree?
The same applies in cooling mode i.e. lower the heat sink temperature , EER is higher?
Thanks
http://www.waterfurnace.com/literatu...n/SC1007WN.pdf
Yes, page 31 and 32 will give you the data you are looking for.
Beware of advice given by some guy on the Internet.
Yes that would be true. But how would you do that?
Yes and a heat pump basically works like air conditioning in reverse
Yes I agree because you will get a greater heat transfer due to the higher delta T, with presumably no change in the work input to the system.