Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2006
    Posts
    2,601

    Super Small Balance Valves??

    I have some Console units that are piped backwards. When I repipe them, I want to replace the Griswald (sp.) valve. I'm going to have to do the piping inside the units, so I don't have to drain the system. Need half-inch balance valves with an adjustment handle. BTW you balance these units by water temperature, in and out.

  2. #2
    Join Date
    Nov 2001
    Location
    Moose Jaw, Saskatchewan, Canada Occupation:Interprovincial Plumber, Commercial Gasfitter Interests:
    Posts
    2,412
    I love my job, but paydays Thursday

  3. #3
    Join Date
    Dec 2010
    Location
    Toronto
    Posts
    1,253
    Quote Originally Posted by madhat View Post
    I have some Console units that are piped backwards. When I repipe them, I want to replace the Griswald (sp.) valve. I'm going to have to do the piping inside the units, so I don't have to drain the system. Need half-inch balance valves with an adjustment handle. BTW you balance these units by water temperature, in and out.
    Or Armstrong

    http://www.armstrongpumps.com/presen...01&modelID=005

  4. #4

    hi there

    very interesting thank

  5. #5
    Join Date
    Aug 2006
    Location
    Columbus Ohio
    Posts
    2,019
    http://completewatersystems.com/prod...alance-valves/

    B&G circuit setters is the only way to go IMO.
    UA LU189

    10mm, because it's better than .45acp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event