Qudra fire 1200i pellet insert
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2012
    Posts
    10

    Qudra fire 1200i pellet insert

    Having a problem with my quadra fire 1200i. The pellet insert starts fine but after the initial pot burns it does not feed pellets. Thoughts. I cleaned the ash out of the exhaust area and it worked for about 1 day. Do I need to completely clean the vent pipe.

  2. #2
    Join Date
    Dec 2011
    Location
    PA
    Posts
    199
    It's never a bad idea to completely clean the stove anytime you have a problem.
    In this case it could be in need of cleaning or it might need a thermocouple. the thermocouple is what tells the control board there is a fire, without this the control board wont feed more pellets.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event