Search:

18 plus 9 equals more than 24 there not gonna work when you hook both of them together
learned that the hard way had 4 units that was slightly over btu rating of condenser asked the rep at supply...

check compressor terminal connections
had same issues a while back ended up being one of the spade connections was loose causing it to go out on overload

traced it with silver sharpie and used a box cutter to cut the foam

70 to 80 percent are failing most likely due to not pressurizing the tank that is more important than position if u have 70 to110 lbs street pressure and do not fix that u have a tank with 38 lbs on...

So can the fieldpiece

Ya actually it is its about a 1/4 inch over line ill remove some see how it does
thx

Question last time i used my pump i had a little bit of oil coming out of the exhaust
is that the check valve going bad

Drop isopropyl (rubbing) alcohol into the opening of the SVG2 sensor and pour it out. Leave the sensor opening uncovered long enough to completely evaporate all of the residual alcohol. Do not use an...

From the instructions on fieldpiece gauge after cleaning it let it air dry
i add the alcohol let it sit and turn it upside down give it a little shake and put it in the sun to dry it out

It's isopropyl that i use that what fieldpiece said to use to clean it

Ya i order the nylog and keep the alcohol in the truck i clean the sensor every couple of uses

Im chill good info

Yes i used a silver sharpie to trace the tools

Believe me the tools are real maybe if i even thought twice about the comment i would retake it and show a receipt
Maybe it was the lighting and definitely would not waste the time to photoshopped...

Thx appreciate the knowledge
Knowledge equals $$$$$

Burnham makes a good oil boiler
My old boss was excellent with oil he said the crowns arent that good as far as oil goes something with them sooting up to easy

Ya everybody keeps talking about the bluevac maybe next big job ill buy it and compare it against the fieldpiece
Thanx for the input and what tee fitting should i ask for so i can compare that...

Ya i hear on bumping it thats why i got the case it goes on the pump and right off into the case if the tree becomes a problem i will get the tee fitting you are talking about but so far down to 300...

Hvaclover in the vacuum setup there is two core removal tools like u said two 3/8 by 1/4 vacuum hoses and a tree that tree is a solid piece of brass it has one more connection for the gauge at the...

And about the expansion tank failing
most of them fail because the factory charge of 38 psi needs to be adjusted to incoming street pressure which nobody does and u have a bladder that is expanded...

The honewell amx requires no heat trap which means u dont need that mess of piping maybe u should do some research before u go rambling about something being easier

most of the piping is due to the mixing valve they need a heat trap any state facility requires mixing valves on the heaters so nobody gets burned
the watts mixing valves are a pain in the butt...

Havent used the bluevac everybody raves about it on here my supplier carries fieldpiece and yellow jacket i try to buy my tools from them cause there is no hassle when there is a problem haven't had...

cases by source
check them out they have everything you could possibly need reasonably priced too

i dont and like knowing the job is done right