Search:

Type: Posts; User: beenthere

Page 1 of 20 1 2 3 4

Search: Search took 0.56 seconds.

  1. Replies
    7
    Views
    118

    Sorry, we don't talk or post prices here.

    Sorry, we don't talk or post prices here.
  2. Replies
    8
    Views
    178

    Buy a see through fiberglass air filter, put it...

    Buy a see through fiberglass air filter, put it in. And see if that stops the error. if so. Either you bought a very restrictive air filter, or your duct work is really under sized, or your A/C coil...
  3. Never heard of that before on any brand.

    Never heard of that before on any brand.
  4. Replies
    15
    Views
    268

    I was answering this question. So what is your...

    I was answering this question. So what is your answer to it.
  5. Replies
    15
    Views
    268

    Can't predict that over the internet.

    Can't predict that over the internet.
  6. Replies
    15
    Views
    268

    Well. From continuing to get it to work, the...

    Well. From continuing to get it to work, the compressor may be damaged. You should have left it off after it first failed. You have been allowing the compressor to run hot from lack of refrigerant....
  7. Sorry, this is not a DIY site.

    Sorry, this is not a DIY site.
  8. Replies
    20
    Views
    814

    Why would you leave your tools in another truck...

    Why would you leave your tools in another truck if you know your on call.

    Or are you at one of those companies that your on call whether you are or not.
  9. Replies
    7
    Views
    279

    A lower CFM on a heat pump can lower sensible...

    A lower CFM on a heat pump can lower sensible heat. Heat pumps are generally at their most efficient at 450 CFM per ton.

    If he actually measured the static, you should be able to see his test...
  10. Replies
    2
    Views
    143

    Most likely it is time and temp.

    Most likely it is time and temp.
  11. Replies
    7
    Views
    279

    He estimates hat it is currently operating at...

    He estimates hat it is currently operating at .4", or that reducing CFM will bring it down to .4".
  12. Replies
    14
    Views
    529

    Out lived it usefulness.

    Out lived it usefulness.
  13. Replies
    5
    Views
    1,436

    Yep, miss one, and your in the dark.

    Yep, miss one, and your in the dark.
  14. Replies
    6
    Views
    206

    It won't run the blower, until the water in it...

    It won't run the blower, until the water in it reaches 140 degrees. So if it just did a cleaning flush. It will take a few minutes to heat the water back up to 140.
  15. As long as your heat pumps COP is above 1.4, its...

    As long as your heat pumps COP is above 1.4, its cheaper to use the heat pump. Based on your posted rates, and using a 95% efficient furnace.

    At 30 degrees outside, doubt your heat pump will raise...
  16. Replies
    4
    Views
    321

    Fixed the title for you.

    Fixed the title for you.
  17. Bats can get into some places that you can't even...

    Bats can get into some places that you can't even figure out how they got in.
  18. Which means the low gas pressure did not cause...

    Which means the low gas pressure did not cause the condensation problem, since the temp rise was high enough.
  19. If the temp rise was higher last year, then...

    If the temp rise was higher last year, then doubtful the lower gas pressure was the cause.
  20. If the BTU input is too low, could have...

    If the BTU input is too low, could have condensing in the primary heat exchanger. And of course, if too high, could over heat eh heat exchanger. The gas pressure should be set up with a manometer,...
  21. Replies
    23
    Views
    450

    Too much DIY help. Thread closed.

    Too much DIY help.

    Thread closed.
  22. Replies
    14
    Views
    496

    Been doing that since the early 80s. No harm in...

    Been doing that since the early 80s. No harm in doing it, as long as you meter it. Its no different then charging R410A as liquid.
  23. The fan will run fine. Your air filter will...

    The fan will run fine. Your air filter will provide all the resistance the fan needs.
  24. Replies
    15
    Views
    467

    The interlock prevents the strips from coming on...

    The interlock prevents the strips from coming on without the fan running. Helps to prevent them from burning up from no air low.
  25. Replies
    15
    Views
    467

    Merged threads.

    Merged threads.
  26. Replies
    14
    Views
    496

    Call them back, and tell them the compressor was...

    Call them back, and tell them the compressor was not the original problem. Its compression ratio was fine. And if they don't have time to see what it really is that is wrong. Then you know they don't...
  27. Glad to hear they are taking care of you.

    Glad to hear they are taking care of you.
  28. Prestige IAQ.

    Prestige IAQ.
  29. Your A/C contractor will know what is needed. ...

    Your A/C contractor will know what is needed.


    Sorry, we are not a DIY site.
  30. Could be that moisture got into the switch.

    Could be that moisture got into the switch.
  31. Sorry, we won't help you install, or pick out...

    Sorry, we won't help you install, or pick out what furnace you install yourself. That is not what this site is for.

    Thread closed.
  32. 100,000 BTU input. Its the heating rating.

    100,000 BTU input. Its the heating rating.
  33. I think your exceeding the allowable DIY advise...

    I think your exceeding the allowable DIY advise from our site. The questions you have, are the ones you would ask the installing contractor.

    Thread closed.
  34. Replies
    14
    Views
    534

    May have been what the original owner insisted on.

    May have been what the original owner insisted on.
  35. Replies
    33
    Views
    1,553

    Dang, put to many C's there.

    Dang, put to many C's there.
  36. Replies
    15
    Views
    549

    Some brands may have a 60,000 2 stage that is...

    Some brands may have a 60,000 2 stage that is lower BTU then 40,000 in first stage.

    The more I think about it, Goodman, and Lennox both may have 40,000 2 stage furnaces.
  37. Sorry, this is not a DIy site. Please take time...

    Sorry, this is not a DIy site. Please take time to read our rules, thank you.
  38. Replies
    15
    Views
    549

    Hard to get a gas furnace small enough not to be...

    Hard to get a gas furnace small enough not to be over sized for 600 sq ft.
  39. Replies
    6
    Views
    311

    Yep, top of the line when it was made.

    Yep, top of the line when it was made.
  40. Moved this to the AOP Residential forum. Might...

    Moved this to the AOP Residential forum.

    Might want to use the contractor locator link in my sig to see if any of our members are in your area.
  41. If he placed it underneath the coil. You should...

    If he placed it underneath the coil. You should be able to see the hole he made.

    High oxygen makes a cooler flame, so efficiency is lower.

    Unsealed return can draw in unconditioned air from the...
  42. Replies
    1
    Views
    149

    Moved to Junk Yard forum. This is the proper...

    Moved to Junk Yard forum. This is the proper forum for selling things.
  43. Replies
    15
    Views
    549

    Might be able to get a 2 stage that is lees heat...

    Might be able to get a 2 stage that is lees heat in first stage, then the smallest single stage is.
  44. Replies
    21
    Views
    1,268

    The OP makes it sound like he changed that stuff...

    The OP makes it sound like he changed that stuff himself.
  45. Put your CO2 meter down low by the floor. Might...

    Put your CO2 meter down low by the floor. Might be that your house has a high CO2 level all the time, but it isn't until teh blower tarts moving it around that it rises to where the meter/monitor...
  46. Replies
    6
    Views
    270

    What MERV rating filter would be too high will...

    What MERV rating filter would be too high will depend on both the brand of filter, and your duct work's size.
  47. Replies
    33
    Views
    1,553

    If they would have rotted it 90° CCW. Then your...

    If they would have rotted it 90° CCW. Then your shrubbery would have been in the way to work on it.
  48. As soon as the burner runs, or a soon as the...

    As soon as the burner runs, or a soon as the blower comes on?
  49. 400 CFM moving through a 10X14 duct at 425 FPM....

    400 CFM moving through a 10X14 duct at 425 FPM. Being blown out of 2-4X14 openings with 200 CFM apiece, will come out at a velocity of 580 FPM. The air picks up speed as it goes out the small area. ...
  50. Supply static pressures seem low. Do you have...

    Supply static pressures seem low. Do you have central A/C? If so, sounds like he took the supply reading after the A/c coil. Which gives a false static.
    Looks like you reversed the low and high...
Results 1 to 50 of 1000
Page 1 of 20 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event