Search:

See this so much on the white wire never even think about white signaling neutral anymore. Crappy install with the "relay terminals pointing out" almost touching the door. But the potential relay was...

358961

After watching the factory guys use fin combs, it helps to use a light lubricant to make the comb slide on the aluminum easier. Just have to make sure and clean it after your done. I have used soap...

Float switch on the secondary drain would be nice also

Where is the drain pipe????

He built a separate building and regularly has large groups of people there for whatever reason.
Why should he get a pass on fire safety and ADA just because it is bible study.
Also sounds like he...

My favorite is
You my friend should have been swallowed

looking at the install it does not appear to be hacked in.
4x4's appear to have roof padding under them to minimize sinking into gravel.

4x4's also longer than unit to disperse weight?

Piping...

I got to see him in concert a few months before he passed. One of the greatest bass players in my opinion.

http://youtu.be/6O9zMnwD65Q

One of my favorites

http://youtu.be/TEnzdp71U78

Glad to know I am not the only one who comes across crap like this.

I wonder how much stuff like this found by follow up hacks and just sealed back up!

even with the correct swing on the door could be painful if you did not lock the door!

If you want to have call backs for leaks go ahead. fittings have to be perfect to work and by perfect no unusual gaps in spacing around fitting. sensitive to vibration. Just not a good field product.

Copper tubing benders and swagers - paid for themselves in reduction in fittings, silfoss and torch gases.
Digital guages - from pressure checks to diagnostics on a system just flat out speeds the...

He was trying to make a tuned mass damper like they have in high rises to stop building sway during an earthquake.
That is the norm here for hanging units. Hope we do not have a quake cause we...

I remember working on one of those old Lennox units when I first got in this business in the mid 80's. Compressor would not start. Pulled cover off of compressor terminal box bent down to ck power at...

Look at Uniwelds ratcheting bender includes an 11/8 set up. I paid $119.00

Russell
Received my SMAN3 last Tuesday and finally got to use them Saturday. Have a question regarding the micron gauge feature. Where is the sensor reading the vacuum.
Between hi/lo hose inlet...

Just as long as mine gets shipped first it is all good

I have already placed on order (special order and prepaid). I hate waiting!

Please tell me that is Johnson Controls van in the background!!!!!

http://www.fieldpiece.com/news/165-fieldpieces-new-pipe-clamp-thermocouples-offer-easy-access-and-fast-accurate-readings-for-pipe-temperature-measurement

Ck Fieldpiece same clamp same patent...

My system is 5 years old. In 5 years I have only changed filters, hosed out the condenser. No guages have been on the system just checked line temps the start of each cooling season. Got my 550's in...

Did he use a scale to weigh the refrigerant into the system?

Have whoever does the compressor changeout weigh how much refrigerant comes out of the system

From your description your units...

Run Cap Bandit