We are just about to stick our neck into the controls business. It is not out of desire but neccassity. Tridium is the front end we are looking at. I have some people coming on board with this...
Type: Posts; User: CaptJackSparrow
We are just about to stick our neck into the controls business. It is not out of desire but neccassity. Tridium is the front end we are looking at. I have some people coming on board with this...
Abs is correct. The old cvhes came from the factory with a bench mark. The cvhe was a change from the old ways of chiller design. Each chiller is custom unlike the cvha / cvhb where the selections...
Pressurize with nitrogen to about 300 psi and tap the case with a hammer. Works " sometimes". Never use acid or corrosive liquids that can attack the copper. That could turn out bad. You could wind...
Gents
we have a 23xl that went down on amp imbalance. The cts are on the line side of the reliance vfd. We checked input volts and calculated the imbalance at .6%. However, the voltage was...
Private MSG age and asking price. Thank you.
I have a 208v rtaa 125
Send me a private MSG with contact info.
Forget that! I want the 10 ton rtu. all i need is a 5/16 nut driver, fluke meter and a set of gauges and i will have it running. No rigging, chain falls, grinder box, machinists box, tool box,...
Check your private msgs.
Try Agitene from grainger. It works great, drys without a film. It does dry slow so if you are in a hurry to but something together ,you can hit it with contact cleaner. We also started using MEK...
I have a Trane 600 new with warranty till Aug 2011 and a York 525 ton with warranty.
Looking for techs with leadership capabilities that want to run their own territory in Lubbock, Amarillo, San Angelo, Brownwood and Midland/Odessa. We are a growing company and a member of Chiller...
Now i'm confused!
Is that thicker than 111?
Yeah its bad all over. The dismal tide!
By George, you should both be ashamed! Why, we should all go down to the nursing home and beat up some old people! Or kick a puppy! maybe, find a crippled child and slap him around a little!!:angel:...
On a date with my wife but I still got plenty o smack fer boff of ya! Be back soon!
I had some of this some years back. You remeber the brand name?
Have you guys had any problems with the calibration drifting on these? I have had a few I suspect but it could be someone turned the cal screw.
Ok I admit it, I'm a little worried about my horns! If we happen to win I will come back and talk a heap of smack! Oh by the way, that was me running on the field with the water bottle!
Just a little smack talk for our home town boy Colt McCoy. My son played with Colt. KLOVE you Alabama boyz better get ready cause we gona kick that booty! Your boy stole the hiesman but the game is...
Yes, we were just accepted! Did you ever use a slap hammer and spear to pull the tubes? I pulled the tubes out of a McQuay like that back around 86 or so and my right tricep is still sore today!
AC I miss standing on the ground to do an overhaul. The old knees are not what they use to be and sitting on that CVHE evap for a week sucks! I did a CVHB not long ago and it was kina nice to stand...
Mustard, anyone who wants to do a re-tube is not wierd, they are just plane crazy!
I recall some of these that I upgraded the mods to the new cond fan control but in the end I installed an ambient temp control so that when the oat dropped below say 50 deg I took over fan control...
I don't know? Seems to be good and bad in it all. I have been fortunate enough to be the overhaul guy when I was younger then move into corporate managment, then start my own business. I think corp....
I traded the hoarse for that bike. When did u take that pic of me?
Horses, Women, there all the same! They leave you high and dry! Kinda scary walking through moutain lion country with a goat head stapped to your back in the dark!! Thats called bait!!! I was praying...
Aw there not hard. They just spin around in circles!
One thing we all have to respet with Trane is their ability to sell thier story no matter what that story is! You don't get 75percent market share by putting your foot in your mouth. You get it by...
My bets on the pump being locked up if you didnt check it. If its an older machine the foam breaker could be coming apart getting the alluminum in the pump. We always change the foam breaker on these...
I thought about that myself. I would love to have a chiller school just to train guys for this part of the market. Of coarse thats what we are doing anyway, the profit just comes from the customer....
Sorry Graham I have a different opinion I think hot water leak checking is %$#@^%! I have caused more leaks with hot water than I can stand. We went to chillers with no purge time, hook up the hot...
Here is the fruit of my labor. If the pic attaches. I cut down a tree and carved out a bow with a flint rock! Rassled a buffalo to the ground, held him down till i pulled enough hair from his tail to...
Thats them Dallas boys. Shoot, we even wipe with prickly pear when we hunt out West!
Yeah last time I let go of the wrong part of the sling shot. Oouuuch!!!
DEUX
I wish I were hunting in your back yard there in saskatawatchacallit! Yall have all the big dear. I am hunting wee little Texas wabbit deer! Not everything in Texas is big!
Too late! Went to arp, got mad, started screaming at the wacos there and skeered everything off!
I am setting in my tree stand bow hunting and surfing hvac talk! Is technology cool or what?
Thats what we use. They will get brittle with time though.
Who make a good h20 chiller hot water machine?
Thank you sir!
Just to refresh this issue I have found that I cannot buy the CH531 and cannot Install a Dynaview. We will be going to a MCS class soon. Also there are more ways to skin this cat but I will not share...
What was that new forum for rating HVAC tools and equipment? I cant remember? Getting old!
You need to install a condenser water regulating valve controlled by delta p between evap and condenser if you don't have it.
Just stay. Away from trailer hill after you get looped!
The exv min steps is expessed in steps. Seems like 1780 steps but you will need to check iom.
I was refering to chill h2o flow change.
Were u at 100pct load when you locked the exv at 60?
...
Wisper, you probably know to check the charge by exv position at 40 to 60pct at 100 pct load. Also the exv min steps was increased on early machines. Water flow affects discharge superheat allot...
The transitiion complete contacts are made with gold! Different from all the other contacts. You must get them from Trane or you will have problems. You could swap the like aux on the other circuit...
Sometimes they use hot water or steam to clean the fill. This will kill the uv protection on the fill and cause premature failure!