Search:

Riffdav
I am not allowed to post my E-Mail
did not see yours in your profile
My address is visible in my profile
feel free to e-mail me

I did call a Belimo Rep in Connecticut
I am waiting for the new actuator#AFRB-24
He did not specify if an Adapter is required340301340311340321
Supposedly this will fit the existing valve
The...

Hello:
What number in the Belimo Actuator Part Number
Will specify the Type of direct coupling pictured in the
Attachment
We are operating over 45 Belimo valves and
the Actuator must have...

Can not complain ,One of our Heat Timer Boiler Control, from 1988 ,gave out
Unfortunately,Heat Timer does not know the meaning of a wholesale price
I do not want to overload,an already overloaded...

Pulled the unit out of wall today
Initially compressor would attempt to start
but would make a grinding noise and cut out
The threaded grommets that the compressor mounting bolts screw into
broke...

The kit includes a run capacitor
Thanks much ,will go with the hard start device

This new wall unit had the rotary compressor burn out after one year
Evidently there is an electrical problem.I want to install start gear,Start relay and Start Capacitor,INSTEAD of a off the...

10 Ton Scroll Compressor, R-22 AIR Conditioner
Suction: 51 P.S.I. Discharge: 200 P.S.I.
Condenser water in :75 Degrees
Air Temp entering evap coil :74 Deg
Evap Coil Clean, good air flow across...

Can you answer a question fro me, or at
least point out the part of the Andover Continuum Version 1.74
help file
that may contain the answer
I created a graphic page
I want to link a non...

Thanks for the E-Mail
I forgot about using HVAC Pro .Thanks for the refresher

Does Andover/ InFinet series produce a Netwoked Thermostat,similar to the Johnson TEC network thermostat
Want the option of overriding the Stat from the Continuim Gooey
Need the G, Y, Y1 terminals

Excuse me I am thinking of the Johnson FX controllers
I want to view how a configuration is operating in real time, with out having to repeatedly open and close the GXTool and open up the Web...

how do I run the simulation app
from the Johnson Controls GX commissioning
tool

A supply air fan , controlled by a Variable Frequency Drive, supplying multiple V.A.V.'s
If all the V.A.V.'s are 100% open Is the Fan generally Sized so that it will
operate at Less than 100%...

A supply air fan , controlled by a Variable Frequency Drive, supplying multiple V.A.V.'s
If all the V.A.V.'s are 100% open Is the Fan generally Sized so that it will
operate at Less than 100%...

I notice that Niagara is programmed in what aapears to the Java language
What type of java is it.It appears a little different ther Basic Jave used to
return"Hello World".How does Niagara differ...

I want to animate an air handler page for a demonstration.
A revolving fan, when I adjust a setpoint want a damper to move or a valve to move.
Will not have Internet access, therefore I cannot...

It worked,thank you all
Now If I can get them to communicate together

Have Two New Alerton VLD 362 Stats ,about 19 feet apart from eachother.not communicating.If we connect both to the RS-485 bus we loose communication with the one that had communication.
Unplug...

It is an Alerton VLD-362

Have an Alerton thermostat that strongly resembles the Honeywell
Vision Pro series TH8320U1008
The stat is communicating ,(has MS/TP terminals),with a nearby unit
It controls cooling ,...

I have to go to a site later.
I do not have the
AX software with me.
Can I commission two points .If I am connected to the Jace
The Johnson FX Master (Tridium) controllers have a limited
version...

Found out that there is no Modbus/Infinet gateway
Have to install a BacNet driver card on the devices.Then need an Andover BacNet master controllerThe master controller will tie into the ethernet...

I am looking for a gateway,Fieldserver does not carry the protocol
I have three Modbus devices RS-485 2 WIRE
I want to integrate them into Andover Infinet bus also RS-485 2 wire

I haven't attempted it yet, but
can I connect to the serial port and use ProCom Plus or
any VT-100 emulation software.
Did not want to make this a big investment.there are
control programs on...