Search:

Thus, if they are not in the open config file, and are going to be added in the upload, the 'module not matching' warning.

It will write to the file that you have open in the GX tool.

Best way to do it is to open a new file (blank) in the GX tool, then upload the config out of the DX. Then you can compare it to the...

Point taken.
Not to be too picky, but it's actually Niagara.

So you're saying I (non-tac contractor) could buy WP Tech 5 somewhere?

Yes you can. They are the same device.
The -0 means a new device and the -7 means it was repaired/rebuilt.

Right on was the OB-Yoda with that one.

I don't see anything but standard JACE 200/600 stuff with a N2 driver.

The FX20 has less memory than the FX40 and the FX60 has more (even before the extended memory option).

The 600 has a...

I thought I remembered a post where someone was interested in buying used NAEs.

Are you offering a finders fee?

http://www.hvac-talk.com/vbb/showpost.php?p=1622131&postcount=11

You are seeing the 'real' point names. You'll have to activate Extended Labels under the view menu and cross-reference them to the NAE display names.

Hey Freddy, sounds like you could be working with NAEs every day if you want!

freddy,

When are you going to go help this guy out. Sounds like the contractor could use some guidance.

This is in your area, isn't it?

freddy

I was pretty dense on that one but I got you now on the KYC2003.

I'd bet that the JCI police are on the case now.

Look into this to see if this would fit your needs. http://csicubed.com/csi3_gcm1.html

KYC? did you mean KFC - Kentucky Fried Chicken?

From what I've heard 'over the street', they should work on the quality of the iLON hardware to reduce the high failure rates.

I guess that's one of the reasons that JCI has added the 'flat LON'...

If you can't NOT the status to reset the timer, look into the RSR in the PLC to see if you can use it to do what you're looking for.

Right on. Yes I need it.
Thank you!

In your user profile you can pick it.

I have a Landis Gyr Unitary controller in a small church. It has a LCD display and the rj11 jack on the lower right side. Early 1990s era.

Can anyone tell me if this be accessed via a terminal...

Come on sysint, don't imply that all Tridium vendors act like the few (namely TAC/Invensys) that try to maintain ownership of the JACE/system/software. JCI, Staefa, and HW (HW is a free option - yeah...

Does that mean yes?

Is this the new JCI recovery slogan?

So you are saying that JCI will license modbus on an FX40?

Since the 485 port is N2 on the FX, how is that done?

Did you have to run any kind of "export" utilitiy or were the objects alreday there? Most were already there. Had to go into the properties of some devices and check the BACnet box to get access to...

I've done it numerous times, with the WebCtrl flavor.

"The TAC Xenta 700 series is the first building automation controller to combine building control, web functionality, alarm handling and amazing graphics, all in a powerful compact package."

WOW!...

It's the license. A closed webs only allows the HW version of workbench to engineer. An open one allows any version of workbench to engineer.

Cut your canvaspane out of the scrollpane. Delete the scrollpane. From bajaui, add a borderpane. Paste the previously cut canvaspane onto the borderpane. Open properties for the canvaspane, for Scale...

Thought I'd pass along, and ask for confirmation, that I heard today that JCI plans on releasing other AX models in the FX line. 200/600 it sounds like. It would be nice if the 500 and NX were...

Chet
If your Project Manual 1 includes 'General Conditions of the Contract for Construction', AIA doc A201/CMa, review these sections:

6.1 'Owner's Right To Perform Construction..' (operations)...

Has anyone heard when the FXs will be going to 3.1? Or even better, straight to 3.2?

I agree with all the FX40 votes and reasonings.


That's because 99% of it is Tridium. You wouldn't want it any other way.

I pretty sure the latest JCI version is only 3.0.106.

Directly on the LON.

I'm looking for your recommendations for a JACE friendly, LON space sensor with setpoint. Display is not required. TIA

Config view for the XL10s don't have the offsets.

Refer to this thread:

http://www.hvac-talk.com/vbb/showthread.php?t=146476

sys, It is the law, resistance is futile.

I am asking if anyone else had encounter this, from JCI or any other competitor, and if they kept financial info from them using exemption 4 of the...

Not me.

I was just curious. HW keeps sending me webs with the wbin locked as webs, which doesn't fly with our customers (and us) and was wondering if that was the key for the Spyders.

Saw it at two K-12 school corporations. They both left JCI after since the 2004 purge and went with another provider.

Shouldn't FOIA Exemption 4 protect pricing from needing to be released?

code

Do you know what it is in the webs/vykon that allows this?

Has anyone encountered JCI filing FOIA papers to ex-customers via JCI lawyers?

These might help?

http://www.ci.tigard.or.us/business/bids/docs/advertise/hvac_packet.pdf
...

While setting up a bar graph or analog meter scaled from 0 to 2, the scale will show 0s and 1s only. No 0.6, 0.8, 1.1, 1.2, etc.

Is there some way to get the scale to readout in tenths?

IndyBlueKool-

I thought I'd give you a pic of one of the 'control' system installs that you speak of. This can go with your speeches that you give to your ex-clients.

You know so well, just a...

LON linked VAV nvoterminalload to RTU nviterminalload, bound, and it works like a champ.
It's kind of amazing that when you do it like your suppose to, it works. Duh! on me.
Thanks for the help.

Take a look at the JCI's DIS1710.

code

I won't be on-site until WED PM or THU AM to try this. I will follow-up.

After davem's 'point me in a direction' post, I did some more reading and found out that I was doing exactly what...

Thanks, I'll take a look and give it a shot.