Search:

that's what I suspected. When I signed on for the high efficiency model seems like I remember expecting it to provide air temps in the 90's.

I'm actually measuring right above the air handler so I'm getting a reading just as it leaves the blower. Figured the register temp would not be good to work from.

I think I'll install a temp...

My system has just really got going but the air temp seems low at the air handler. Maybe I'm just used to a gas unit.

This is a zoned system using an 18 SEER Amer. Stnd. air to air system. The...

Total zone 4 I think is the name on the box. It's Honeywell. We're only using 2 zones.

where would the cycle rate adjustment be located. I looked on the digital stat and there are not switches to be seen even after taking it apart. Is there a software switch?

Or is this done on the...

2 required? Hum, I think it came with one and the tech. wound the wire around it several times but it's still not triggering propertly. He said the low current draw of the variable speed fan was the...

that's what I thought. I don't think he's got it wired properly.

I think there's supposed to be some sort of inductive relay that triggers the unit when the fan begins to draw current.

thanks

My electronic aprilaire cleaner is connected and runs all the time. Should it do this or should it be configured so that it only runs when air is circulated?

A heat load was done. As a matter of fact due to this forum I went through "a number" of different contractors before settling on this one for the install, mainly because he actually goes by a heat...

My electronic aprilaire cleaner is connected and runs all the time. Should it do this or should it be configured so that it only runs when air is circulated?

They have finally completed intallation of my zoned HP system. It's been running about a month, but it does not seem to operate as I might expect. Here's the specs:

Am. Stnd. 5 ton HP with dual...