Search:

Type: Posts; User: jimdavisjr

Search: Search took 0.00 seconds.

  1. I live north of Olathe

    I live north of Olathe
  2. Thank you. Though this fix seems easy...

    Thank you.

    Though this fix seems easy enough, I will still call the local company back to make this change. I don't want to screw it up and not have it covered by whatever warranty it might...
  3. Here are four images of the board. One close up...

    Here are four images of the board. One close up of the board and one each showing the red, white and black wire locations.341351341361341371341381
  4. There are 6 lead wires coming off of the motor...

    There are 6 lead wires coming off of the motor plus two wires connected to the cap.

    The wires connected to the cap are purple.

    The blue, yellow and brown wires are bundled and not used.

    The...
  5. Thank you for the input. I am assuming that...

    Thank you for the input.

    I am assuming that the black and white wires are where they are supposed to be. I looked at the circuit board again and I don't see any jumper locations that look like...
  6. Just noticed the Blower Speed Chart on the...

    Just noticed the Blower Speed Chart on the diagram.

    It shows Cooling for my model to be lead wire 2 (Black). For Heating it shows lead wire 4 ... not sure of the color for this wire. I have a...
  7. I am looking at the electrical diagram from...

    I am looking at the electrical diagram from inside the door.

    It shows the blower leads as follows:
    1. White = Common
    2. Black = Cool
    3. Red = Heat
    4. no color given = not used
    5. no color...
  8. I just looked at the wiring again on the motor. ...

    I just looked at the wiring again on the motor.

    The yellow, brwon and blue wires are all connected together and do not go anywhere. Just left hanging at the bottom of the compartment.

    The...
  9. Question for pacnw ... It sounds like you are...

    Question for pacnw ...

    It sounds like you are familiar with these units.

    Should the blue, yellow and brown wires coming off of the motor be wired together? I have not paid attention to where...
  10. Re: Filter ... it is a 20x25 filter required. ...

    Re: Filter ... it is a 20x25 filter required. Udarrell, can you advise what kind of filter I should be using?

    It sounds like this could be adding to the problem. But if the blower motor should...
  11. Bottom Line ... Does everyone think that the...

    Bottom Line ...

    Does everyone think that the problem is with the blower motor / cap?

    This company that installed it is not a small company. I have to think that they will have techs that know...
  12. Forgot to mention that the reason I left the...

    Forgot to mention that the reason I left the panel off of the A frame to test the air flow.

    When we had the basement area remodeled to add more square footage last winter there was some...
  13. I don't remember if the second tech even opened...

    I don't remember if the second tech even opened up the bottom compartmetn of the furnace. But if he did, then yes he did leave it like this. He was there about thirty minutes and cleaned out the...
  14. Regarding motor Replacement. No, I did not...

    Regarding motor Replacement. No, I did not replace the motor. It was done by an HVAC company in Olathe, KS with "star" in the name. Then they quoted me a cost to replace the entire furnace which...
  15. Regarding the loose brown wire ... This ties into...

    Regarding the loose brown wire ... This ties into a quick connect plug that also has the black and white wires coming from 120V power source. After it plugs into the quick connect on the lower level...
  16. The cap is 7.5 mfd. I am still getting air...

    The cap is 7.5 mfd.

    I am still getting air blowing through the registers. If the motor is turning the wrong direction would that be the case.

    Oh, one other thing that I have done. When I...
  17. I also thought about opening up another cold air...

    I also thought about opening up another cold air return not far from the furnace to get more air into the unit. But I am afraid that this would goof up the air flow throughout the entire house. It...
  18. I have thought about removing the air filter to...

    I have thought about removing the air filter to see if that makes any difference. It is brand new and should not be causing any clogged air path. But it is something to try.

    Besides not enough...
  19. No. I don't have any guages to be able to...

    No. I don't have any guages to be able to identify the temperature at the registers.
  20. Lennox G23 Q3/4 - 125 - 4

    Lennox G23 Q3/4 - 125 - 4
  21. What blower motor specifications should I expect...

    What blower motor specifications should I expect to have to support the Lennox G23 125K BTU furnace? If the workmanship was not correct to replace the motor I may also have an issue with having the...
  22. Attached are two images of the blower compartment...

    Attached are two images of the blower compartment and the uninstalled part of the blower housing.341231341241
  23. Lennox G23 furnace cycles multiple times before reaching set thermostat temp

    Background Information:
    I have a Lennox G23 Elite Series 125K BTU furnace ... 1997. It appears to be in excellent physical condition ... clean and without any rust, etc. This unit is installed in...
  24. I have noted that the G23 heat exchanger has a 20...

    I have noted that the G23 heat exchanger has a 20 year warranty and that it should take around 90 minutes labor cost to replace it. Also, that the XAir % does not necessarily mean that the Heat...
  25. Lennox G23 System 13 years old - Heat Exchanger

    I just had someone come out to do a Fall tune up. They told me that it appears that my heat exchanger is bad ... showed me a tape with "XAIR % = 137.5" to justify that. They had just put in a...
Results 1 to 25 of 25
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event