Search:

Yeas I did a narrow search and checked the precedent box. Also keep ing mind BCU is not communicating either.

BAS Communications com3/com4 shows as text 14 I believe is Comm5. So the words change.
Bcu appears not to have been touched in some time.
I am also trying to connect with a Jace using the comm 4...

Saw some old posts but not an answer.
Using maxline comm 4 driver but need to fix existing issue first.
Not communicating with existing BCU.

All VAV’s are communicating on Com 4 at BCU.
All...

I have access to write to all the cfm settings and have full access to points, however no way to calibrate and set Kfactor.
Rover doesn't do it and Eware needs a DOS machine.

I'm trying to assist a balancer on a project and it's been a long time since I worked with Eware and Rover.
Rover does not seem to have a balancing tool for com 4 or 3 only com 5.
The site has a...

Just moved com from one to the other. Not reusing anything.
Unless the Carrier interface has something different between it's communication between the Alerton BCM and the WEBs-8000 N4 Jace

I also brought all points in as writable just to see what would stick and all were faulted. Read only all fine

Yea and selecting enable

When I bring it in as read only it shows fine

Simple Discovery on Bacnet network. Did upload from device.
At first I brought all the points I needed in. When it didn't work removed all points and only did a discovery on one that I new was...

We are Upgrading a facility replacing the Alerton Jace with an N4 Jace. Majority of the facility was changed to Honeywell. The Alerton Jace was able to write to points on the RTU’s however the N4...

The site will have AX next year, so I need to get this 1 unit back on line.
If I could see the variables to bind I'd be done.

I have a site that is Circon with Lon Maker 3.13.20.
They are not going to upgrade the site at this time.
I am replacing the RTU controller with a W7550C.
I brought the controller into the Lon...

I am in the process of restoring the front end of an existing building.
I have two York 50 Ton Units with OptiPlex controls and a Lon Card. The Lon card is not very good but it is what I have to...

This item has been obsolete for probably 6 years. Titus and associated reps cannot find any. Does anyone have any hidden somewhere or know anywhere I could find some?
Z-Zapper Infrared wireless...

Tried That.
I'm Trying To Get Them To Get A Phone Line Even If Temporary.
I Do Notice I Have No Communication Lights Plugged Into Com1 And Pcl.
Hyperterminal It's Perfect

I have a system that just lost the database and the facility now has a policy no phone lines. Created a problem for restore.
Went to site with backup and PCLedit and the correct trane cable...

Make sure The directory C:\LonWorks\types\User\Echelon\ is in the Device resource files editor.
I agree with reloading from disk though.

Are the network variables supplied with the UKLON enough for your application?
If so Any lonworks controller can control the Lon points of the UKLON.
I did a job where I used Honeywell XL50's and...

I have had many failures with this actuator motor made in china. I also had a friend with set point he had a building and he had to change all of them out (per customer). My Belimo rep through my...

The problem is definitely in the VariTrac PC Software.
Set up remote connection:
COM port: 2 Name of building, phone number
Click on the name of the building under remote connect get:
"Unable to...

I'm connecting directly to the VariTrac12 no tracker.
My modem connects fine with everything
I connect fine at the panel.
I'm using the Trane software for this unit not Hyperterminal.

When I...

I connect locally fine. I'm using the Tarane VariTrac Software. I guess I could use hyper terminal I thoght I would try the trane software. I configured the system with it. The device does not have...

When trying to connect remotely using a modem I get the error "Unable to perform upload Comm port unavailable or busy". I verified the port is free. It is on Com 2. Then the software says to "wait...

I would like to obtain the software to download the P2 file if possible since there is quite a bit to enter. Also I dont have a print out of the points set up. I'm not familiar with CDM software and...

Noticed this Powers Landis/Gyr system has a backup file with a P2 extension The Job Log Text file says it's Objectivity Federated Database Utility Version 6.1.8. I'm getting ready to re type in the...

Thank you for the help, thats what I needed.

I need to reload a program, about 10 years ago I had taken care of another 600 system. I seem to have forgot or I have some settings wrong. I do not get the option for dataransfer only the cassette....