Search:

My reasoning; One cycle, 60HZ on a single phase 208VAC has the same timing period as 60Hz on 240VAC. only the amplitude is different, I think it will work fine.

I see you are installing Lennox, does RUSSIA use same voltage (230vac & 60 Hz) same as USA ? or different voltage?

look great

Ameristar is super cheap - but they held up well in the Phoenix heat. I was pleasantly surprised.

I agree with this 100%.

I been in this trade for over thirty years. 95% will buy the cheapest. if they ever come out with a super unit, they can only sell to the 5% - not profitable. they will be...

Yelp, it is an accumulator !!!, I seen it several time.... rare ... but it is what it is.

Thanks for the heads up.

I personally found Turo air to be pretty Good.

I 've seen that happened a couple times before my retirement. I do not condone such ... However, it is street justice (secretly, I am for it).

Question? Is it common in your area they build house without cooling?

Maybe i live in Phoenix too long; I don't know of a single house build without Cooling for the past 50 years.

Hahaha ...u funny.

Did you just install this system?

with the exception of supply house, just about anyone can buy any quantity of freon without EPA license. I will start with Craigslist, Ebay.. you can add the rest.

I personally don't know of a...

Brought a used sl2 off craigslist. Found 410a leaks where both my H10 missed. love sl2 now.

Cold table, pizza table, reach-in-cooler, reach in freezer, are commonly found in most restaurant which we service a lot. Most of them use 1/4" and 3/8" copper pipe.

I would say no more than the width of a cigarette; 3/8" give or take a hair.

Another thing; sometime we need to put clamp on 1/4" and 3/8" pipe. would be nice if you can make a clamp so the...

Russ, I need a narrower version on them temp clamp, sometime not enough space for the clamp.

As a temporary solution to tie the customer over the week end. it's ok by me.

Wait a minute !!! ... I thought god make everything in seven days.

I had to look up Maine on Google Earth. Wow !! truly a beautiful place. If I am not retired; I would jump at this opportunity. Wish I was 40 years younger.

I am shock reading these. Initially, we had a problem - they took care of it right away - very professional. Thereafter, it worked flawlessly. Reading above complains is like we are talking two...

They last a very long time. I never actually time it, but I have seen many - I would estimate ten - twenty years old (guessing its age).

I would go with my gut feeling, but verify. It May be opportunity knocking, maybe a trap.

Ask him if you can ride with him, tell him you will work for free for ________ Days, week, month, whatever...

Sure look like Larkin

http://www.turboairinc.net/Assets/docs/CutSheet/LED082B.PDF

I don't see a problem with it - should work fine.

For Whatever this worth. We own several sets of testo 550 - probably four to five years old (not sure exactly). At the beginning, we had the clamp problem on two sets; we send them to Sparta NJ. they...

Youtube is a very good place to learn, However, be aware; THERE IS LOT-SA MIS-INFORMATION also. be careful

It has been said many times, "two sides to every coin," So... I set out to find something good about this (however, small)?

How about this; At least, he is trying to earn a living instead of...

Hehe.... good find

Not ideal, but it should work fine.

I personally don't own a harbor freight unit, but I knew a few who do. They claim it work fine - they are happy with it.
I carry several electronic leak detectors in my van all the time.
My...

I like the way it is!! TXV or TEV is just fine with me. I like the superior feeling that I know something so mysterious while others don't.

I will give him A+ for effort.

Sadly, this type of shoty work is getting more common.

Yes, always take pictures. Save my ass many times. Customers put the blame on us until I show them the picture.

Look a bit like North Korea's atomic weapon. Dennis Rodman brought this home for the CIA.

This is what I normally use,

http://www.hvacr-tools.com/product/thermal-engineering-1003-cap-check

maybe you can borrow one.

I use my heat gun to soften the clip, then use a screw driver to prop it wider,(maybe 2 mm), after it cool; it work great.

Maybe you can open your own school. (just a thought)

old school. I am 90% retire. Selling my stuff. I have H10-PM in good condition. Need new battery. my email address in profile.

Bring on the HEAT, The hotter the better!. don't bother me! My office is 76F - 78F. Benefit of being de boss.

I am Keeping my Back COOL.

KB are you locate at 29th ave and Osborn?

D you have any other capacitors? you can try hooking up "series" or "Parallel" together to get what you needed.

We have six of the TIF9010a for over ten years, no failure.
I wish there is a "oz" selection option, when a system call for "147.5 oz" I like the scale to read oz, not pounds and oz. (I am lazy)

88 degree here in Phoenix. ...and climbing.

All the joints held up for me. just as strong as 15% sil fos. When welding TXV joint, I prefer Sta-brite8 - because of low temperature.

We all have to make a living ....somehow.

Looks like an easy fix to me. hehehe

Please send some of your rain and snow to Phoenix. It is getting too hot here. Thank you in advance.

Replying to post #17,
"Is it. How long have you had it. Just curious because I was looking at it. What do you do with the 1" expander? Paper weight."


I have three sets. My first was from...