Type: Posts; User: CHAMBERS87
Sorry wife was typing.
Yes. Thank you.
Thank you sincerely!
Are you familiar with any information with NAE 85? Does it cold more then the 100 controllers andif other devices are installed 64 controllers?
I can't thank you enough for your help!!!!
What does it mean when there is an operational error on the NCE with regard to samples lost and sample error.
Why can't you add a net sensor(say a oa hum) a slave to a Global Share (OA Hum Master ) from a different controller in the MSEA.
What dictates when I should use an NAE verse NCE controller. Right now, some of my new AHU's have NCE's not NAE. Which is better and/or recommended?
Just had a job done and...
What about in the Metasys system extended architecture?
Sorry I mean do are all the audits transferred to remote respository? Regardless of 3 % or 80%?
Does this mean that not all audits are transferred to the remote respository? Or do they all do there just this regulates speed?
How can I determine via BAS if a point is actually real or mirroring another point? Especially since it is an analog input? Is there something that can signify it is not a real point in...
What percentage is recommended for a controller NAE audit trail threshold and why? I can't seem to get a straight answer from the vendor. Most of my naes were set @ 80%, and found...
Thank you very much!
It was a new project; so this time it was to ensure they do it right. There is no maintenance contract as of yet; only with this facility a year. I was very surprised.
They came to install all the new add software on the server that has been missing from our JCI system for about 5 years, help section, graphic tool; then they flip-flopped and said they decided to...
I mean the add-on like help section edit program, should be loaded on the JCI server then we access via leak from our workstation? Right ? Why would we load it on the workstation or laptop and take...
The jci server or workstation?
Why would you not load the software for graphics, help menu and CCT program additional programs the BAS server: instead on the workstation or laptop only? Would that be due to the server...
Why would you not load the software for graphics, help menu and CCT not on the BAS server, and on the workstation instead or laptop only? Would that be done due to the server is...
This is CHW. Sup temp and sup hum is a dual sensor (not my choice) about 10ft downstream into supply duct.
We have new installed ahu and originally the humidifcation was suppose to be installed after the coiling coil; instead it was mounted between the preheat coil and cooling coil which I...
We are confirming that the existing Metasys PMI NC's (N2) will be converted to NIE to view on the New Metasys system extended architecture.
What are commons problems that can occur and that we...
1-So the indoor air handler unit (inside MER) that uses econ outside air damper to lower the supply temp and mixes with the return in the mixing chambers does not need insulation on the outside of...
What we have is insulation wrap. What is the recommended ductwork to be insulated? The OA Ductwork to return, mixing area?