18 plus 9 equals more than 24 there not gonna work when you hook both of them together
learned that the hard way had 4 units that was slightly over btu rating of condenser asked the rep at supply...
Type: Posts; User: timetable15
18 plus 9 equals more than 24 there not gonna work when you hook both of them together
learned that the hard way had 4 units that was slightly over btu rating of condenser asked the rep at supply...
check compressor terminal connections
had same issues a while back ended up being one of the spade connections was loose causing it to go out on overload
traced it with silver sharpie and used a box cutter to cut the foam
70 to 80 percent are failing most likely due to not pressurizing the tank that is more important than position if u have 70 to110 lbs street pressure and do not fix that u have a tank with 38 lbs on...
So can the fieldpiece
Ya actually it is its about a 1/4 inch over line ill remove some see how it does
thx
Question last time i used my pump i had a little bit of oil coming out of the exhaust
is that the check valve going bad
Drop isopropyl (rubbing) alcohol into the opening of the SVG2 sensor and pour it out. Leave the sensor opening uncovered long enough to completely evaporate all of the residual alcohol. Do not use an...
From the instructions on fieldpiece gauge after cleaning it let it air dry
i add the alcohol let it sit and turn it upside down give it a little shake and put it in the sun to dry it out
It's isopropyl that i use that what fieldpiece said to use to clean it
Ya i order the nylog and keep the alcohol in the truck i clean the sensor every couple of uses
Im chill good info
Yes i used a silver sharpie to trace the tools
Believe me the tools are real maybe if i even thought twice about the comment i would retake it and show a receipt
Maybe it was the lighting and definitely would not waste the time to photoshopped...
Thx appreciate the knowledge
Knowledge equals $$$$$
Burnham makes a good oil boiler
My old boss was excellent with oil he said the crowns arent that good as far as oil goes something with them sooting up to easy
Ya everybody keeps talking about the bluevac maybe next big job ill buy it and compare it against the fieldpiece
Thanx for the input and what tee fitting should i ask for so i can compare that...
Ya i hear on bumping it thats why i got the case it goes on the pump and right off into the case if the tree becomes a problem i will get the tee fitting you are talking about but so far down to 300...
Hvaclover in the vacuum setup there is two core removal tools like u said two 3/8 by 1/4 vacuum hoses and a tree that tree is a solid piece of brass it has one more connection for the gauge at the...
And about the expansion tank failing
most of them fail because the factory charge of 38 psi needs to be adjusted to incoming street pressure which nobody does and u have a bladder that is expanded...
The honewell amx requires no heat trap which means u dont need that mess of piping maybe u should do some research before u go rambling about something being easier
most of the piping is due to the mixing valve they need a heat trap any state facility requires mixing valves on the heaters so nobody gets burned
the watts mixing valves are a pain in the butt...
Havent used the bluevac everybody raves about it on here my supplier carries fieldpiece and yellow jacket i try to buy my tools from them cause there is no hassle when there is a problem haven't had...
cases by source
check them out they have everything you could possibly need reasonably priced too
i dont and like knowing the job is done right
yellow jacket makes the setup the tree with the gauge mounts to the vacuum pump two 3/8 by 1/4 hoses go from the tree to the core removal tools and the 3rd 1/4 hose goes from the extra tapping on the...
299811
just purchased setup about a month ago used 5 times all down to 500 microns within 5 min and down to 300 within 15 min well worth the money
good catch medic
299651Moved three condensers today and the homeowner said the downstairs unit never worked that good. I told him i would look into it.
This is what i found it has been there for 9 years and the...
i guess the good old days of a torch,solder,and a set of skills are long gone
at the bottom of the riser
plus there is 2 less joints and the money saved on the ell plus ss
Buy the yellow jacket worth the money
Liberty Model 405
1/2 hp Commercial Drain Pump
I use it for washer machines slop sinks etc only problem it needs to be vented you can run the vent up to the roof with the drain or considering its...
relief valve should be piped 6 inches from ground or at least face it down so when it goes off it doesnt hit someone in the face
vent is in the wrong place
try using a brass nipple the threads have a finer edge to them
I would be looking at what udarrell said what is the blower cfm per ton
you said the air flow has gotten significantly stronger which leads me to belive that compared to the old system's cfm per...
that monstrosity must have been cycling on high limit constantly
one other thing i find most people miss thermal expansions tanks only come with between 30 and 40 pounds of pressure in them due to shipping reasons you need to charge the tank with a compressor to...
expansions tanks can be installed in any direction
more importantly they need to be installed on the cold water line that one looks like its on the hot side of the tank
to many times i see them...
goodman...... you get what you pay for
Keep your head high and stay strong.Positive thinking works wonders.My buddies uncle beat cancer 13 times over a 25 year period.You will be in my prayers
my mother and my younger brother have diabetes its a slow killer.Sorry to hear about the bad news stay strong and my prayers go out to you
yellow jackets tool is designed for the 410a flare.Samsung ductless instructions talk about the difference of the flare.The flaring tool is worth every dollar it has multiple sizes and set the depth...
Is the piston the correct size?
yes your right
title of post was backwards from what it stated in post
wouldn't amps be low if the valves are bad
read again it says high suction low head