Type: Posts; User: Rhinohead
anyone know where i can get wiring diagrams m# ef481ahs freezer
wont start inducer. all power checks ok.but no power out of the inverter drive. any trblshooting 4 the drive or maybe the burner control? relay is eneregizing.
sorry I dont have m# Does anyone know if a standard thermocouple will fit these? it looks about the same maybe a little skinier on the sensor end.
It does look like a GE but says trane on the tag. Thanks for the help.
can anyone help me with the tonnage of this unit? btc120c400ga
KML450MAH got a bad pump motor. Any chance I might find just a motor or would you recomend replace whole assembly? It is a non-reversing motor.
Can anyone convert a trane actuator act00317 to erie?
Replaced oil pump was locked up about 2 weeks go by. Callback seems pump was locked up again. oil filter & nozzle were changed. Pump pressure was at 110. What else might be causing this?
What considerations should be taken when adding wood furnace to a heat pump system? Furnace has it own blower and is tied to supply & return
is that max power from rhinoforum .net?
I wouldn't turn down below 140 unless its designed for it
Techs kit oxy acetylene. Installer the plumbers kit works okay.
Those connections heatup normally and with your od unit not working more so.have it serviced regularly don't be afraid to mention previous problem.
For what use? farm & home tool stihl. pro timber= husqy
Probably been overheated condensor. Captube time.
At least nobody got hurt
Wait till you fall off a ladder. It will slow you down too.
Thanks baldloonie I know I have read many of your posts. Thanks
ya sorry. I just meant for parts. Been a long day
$ 1495 ?
imo They are great keep them in exposed area though
bump! nobody knows come on now. I;ll find ut tomorow. With a phone call.
This is a system I sold under my previous employer. Now 3 yrs. later get acall winds up the compersor is locked. This is a rheem heatpump do I stand a chance of gettin parts or not. I just started...