Type: Posts; User: BASDAVID
I have also corrected VFD noise issues on the FC bus with an Uninterruptable Power Supply.
I should of been more specific; a good Uninterruptable Power Supply may clean up power glitch issues.
If its a power issue you might install a UPS which also adds some surge protection.
Hello all, I was surfing the Federal Jobs Web Site and found this Building Automation position.
Thanks a million
Does anybody know if Trane sells the BMTW BCU cover only? I have an active BCU with a broker cover. I have talked to the my local parts office and they said that they don't. I used to work for Trane...
I have a BMTW and a BMTS that have been retrofited with a BMTX retrofit kit (Same Panel New Electrictronics. I am wanting to install operator displays on both of them. so before I start the process...
Controldude it was ^L thanks for the help it is much appreciated.
If you are a site owner you should be able to get it "keep trying" but if you are a contractor you may have to go through your customer?
ControlDude I am not having any luck; I connected to the mini monitor port with my UPCM cable and Hyper Terminal but I don't see a menu that allows you to disable Ethernet. Is there a special...
Thanks for the info I will try that, I eventually will go to bacnet over IP just don't have the infrastructure yet.
I currently have a BMTS doing EIA232 bacnet with an old metasys MIG 200 which works fine and I am attempting to swap it out with a new BMTX. After converting the database and getting the BMTX...