Search:

Type: Posts; User: breenemeister

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. They were out yesterday and I forgot to ask about...

    They were out yesterday and I forgot to ask about measuring static pressure. I know there is basically none on the supply side based on the fact that you can't really feel any air moving into the...
  2. Problem is resolved on the sound. :grin2: The...

    Problem is resolved on the sound. :grin2: The service guy took the top off and found that the line that leads to the sensor for the TXV was touching the suction line filter drier (in blue in the...
  3. I'm actually surprised at how well it is working....

    I'm actually surprised at how well it is working. The A/C hasn't made it out of first stage while I've been there without me changing the temp to make it happen. The master bedroom on the end of...
  4. Yes, 12 inch T's to 10 inch both ways. 3...

    Yes, 12 inch T's to 10 inch both ways. 3 supplies on one side and 6 on the other.
  5. 600 CFM through 10 round pipe? Possible?

    The install manager has assured me that 10 inch pipe will handle 600 cfm. New system is 2 tons and has a 12 inch round pipe off the air handler with a T into 10 inch pipe. 3 6 inch flex ducts on...
  6. Well, the fix lasted for one cycle. Oh well.

    Well, the fix lasted for one cycle. Oh well.
  7. Holy crap! You're the man! I did that today...

    Holy crap! You're the man! I did that today again. I guess I didn't do it right the other day. The pulsing sound stopped. Now all I hear is regular compressor noise! Thanks man. :grin2: How...
  8. I don't think there's a situation. I was just...

    I don't think there's a situation. I was just pointing out that since I'm now cooling from the upstairs, the temperature downstairs barely moves. Each floor is around 950 square feet and each one...
  9. You may be on to something here. I put a level...

    You may be on to something here. I put a level on it and in one plane, it's off by a 1/4 bubble. When I tilt it to correct it, the sound changes. The pulses get further apart in time if you know...
  10. I had to look that up. That's not cool at all...

    I had to look that up. That's not cool at all man. :beat:
  11. The HVAC guys just left. They assured me nothing...

    The HVAC guys just left. They assured me nothing was wrong with the furnace, it was just dented on delivery. They added more silicone to stop the air leaks. I'll need to go back over it myself. ...
  12. I've got the install manager coming out today. ...

    I've got the install manager coming out today. I'm going to ask that everything gets sealed up better on the downstairs furnace. The new supply they put in the bedroom really bothers me. It should...
  13. That's what I figured. I think you may be...

    That's what I figured.



    I think you may be cycling through pictures in my photobucket account. The old system did have a duct and flex cut into the side of the coil and it was an upflow...
  14. Thanks for the responses from everyone. I've got...

    Thanks for the responses from everyone. I've got the install manager coming out on Monday at some point to look at the furnace and some other issues I found in the attic. What do you guys think in...
  15. I'm not 100% sure it's silicone, but that's...

    I'm not 100% sure it's silicone, but that's definitely what it looks like and I did see a caulk gun laying on the floor when I walked through one day. I just assumed it was mastic. They put mastic...
  16. Good to know, Originally, they were supposed to...

    Good to know, Originally, they were supposed to mastic seal the return and then insulate it. They called me to ask if the could just replace that one section with flex. The goal was to quiet it...
  17. Well, everything's finished and I need to...

    Well, everything's finished and I need to schedule the inspection. They finished the whole job in two days. Most of it looks very good and it's cooling nicely so far, but it also hasn't been hot,...
  18. That's correct, but the filter grill is on the...

    That's correct, but the filter grill is on the first floor and the furnace is in the basement. The grill is 20 by 20. There's an 8 inch pipe off of top of the 20 by 20 grill that goes to another 12...
  19. Main Floor: Goodman GMVC950453B furnace,...

    Main Floor: Goodman GMVC950453B furnace, CAPF3636B coil, and a Goodman DSZC160241A

    Upstairs: Goodman CHPF3636 coil, MBVC1200 variable speed blower, and a Goodman DSZC160241A, 10KW heatstrips.
  20. Furnace filter is in the grill on the first...

    Furnace filter is in the grill on the first floor. The flex connects to 8 by 20 rectangular duct which goes to the first floor where the filter is.
  21. New Installation Going on Right Now - Pics and a question or two

    I'm in the middle of an install of a new system that started yesterday. They finished the furnance/heat pump combo for the first floor. Seems like they're doing a good job so far. They used the...
  22. Replies
    2
    Views
    347

    I'd love to upgrade to Amana, but I've already...

    I'd love to upgrade to Amana, but I've already blown my budget sky high by going dual stage and getting new duct-work. I'll have to settle for the 10 year unit replacement.
  23. Replies
    2
    Views
    347

    Labor Warranties going third party?

    I'm getting two systems installed at the end of this month, but haven't pulled the trigger on a labor warranty yet. I'm getting two dual stage Goodman heat pumps (one paired with a variable speed...
  24. Thanks. I have an outdoor sensor on it, but it...

    Thanks.

    I have an outdoor sensor on it, but it doesn't show humidity. I'll look into the 9000. By the way, the thermostat I'm being quoted for upstairs for Goodman MBVC1200 and Goodman DSZC16024...
  25. I believe I've successfully negotiated with my...

    I believe I've successfully negotiated with my wife to get her up to the 2 stage heatpump on the first floor, but I'm not even going to try for the communicating thermostat. My current thermostat is...
Results 1 to 25 of 74
Page 1 of 3 1 2 3
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event