Search:

Thanks Very Helpful.

Today I found a small leak in the evap coil of a heat pump with my leak detector. I told the customer that he had to replace the coil, but this wasn't something he wanted to do at the moment. I gave...

To be honest your gonna have to check everything. Check the strips, the board the charge; everything.

The only way to properly charge the system on a cool day is to raise the head pressure along with wet bulb, dry bulb, pressure and temperature checks. Of course this depends on TXV or Fixed Orifice....

Can anyone direct me to a website that shows the proper way to charge R410a, and have any of you guys converted over to the new R22? I'm hearing different ways to convert. One of the ways was to...

More information dude! GIVE US P/T ECT

Sir,

In a case like this, the only thing to do is recover the juice and dive in! I would check the drier first to see if there is a temp difference there, if so that could be your problem. Check...

Manual J along with Manual D/ Fibrous Duct/Sheet Metal etc

I think static pressure is very important. I can understand why some guys use 0.10, but its not very good practice. If you add electric filters ect. then you static pressure will change. The best...

Why would you not put a TXV on it? Is it a heat pump?

I like that installation. How long did it take to complete?

Thanks guys!

Can anyone explain to me the process of installing the heat pump high voltage? I understand that this is 240v with a breaker of 60amps (normally). I'm assuming that this is a 5kw, but if I were to...

From what your saying is kind of confusing, according to the numbers. What I would do is check for a restriction in the liquid line drier by measuring the temp in front and the back side of the...

If you have a 2 1/2 ton unit, you should be pushing around about 1000 cfm's. The golden rule is 350 to 450cfm's per ton. I don't know the sf of your home, but you need to make sure that your unit is...