Search:

597 is not taking transfers. I am also a 265 member and have been trying for the last 2 months or so to switch. 501 was giving the run around as they were merging. But on Friday I was finally able to...

Just throwing this out there to see if anyone in the area knows of any union shops are looking to hire.
Just got the news I had been fearing for a while that our biggest account has decided to go...

Charge was calculated by size of receiver height and diameter. and mounting direction ( vertical or horizontal) We all have books and literature from united refrigeration and refrigeration research....

Sporlan OROA-5-180

Just throwing this out there for you guys. Over the last year my company has installed 4-5 new walk in coolers. ( evaps, TXV, line sets and cond.)

And every last one has had a bad headmaster...

A guy at my shop has one sitting next to his seat. No bin or milk crates in the front for his books, and papers to get in the way. He has a little shelf made to sit around the microwave and use that...

Anyone work or have worked for them?

i haven't heard/seen the ke2 and would be interested learning about it. it might be a feasible option for all the B1 systems we have out there

The beacon 1 are junk. But to answer your questions 2sac, yes i did ohm out the sensors, one of the first things i do on any beacon system. They were all ok. And I got the pdf from heatcraft last...

Had this issue last Firday
Walk in freezer ( " converted" to walk in cooler) with Beacon 1 set up. came in and found case at 60* going off on hi temp alarm.
Find coil iced up with about 2" thick...

Not sure if anyone is following this post anymore, but I returned to the store the next morning, 7-24 to find the store at 75 and very comfortable.

Checked the high pressure switches I installed,...

stat at 72, clean filters installed today, belt in good condition and tensioned right

Carrier
m: 48hjd012-h-571hy
I have gone through the site and found countless threads about these relays. And I think i get them and what causes them to trip.

The issue i didnt see addressed is...

In my local there was about a 2 year freeze on taking apprentices. This past fall they took on a new class with a total of 8 people.
There used to be enough people for 2 30 student classes for...

Had a winter maintenance call for a car wash with Cambridge MAUs.
below is the flame sensor, notice how its worn down to a nub. Amazingly it was still able to read flame. told mgr need to replace...

As stated before SMW is at 41 on the check. What is B card wages at? what kind of difference are we talking, and how do i explain that to the wife, LOL
I am always interested in working and working...

I know this is slow season but after talking with my service mgr it may not be a bad idea to look around.

Anyone out there know of any refrigeration/commercial shops that need guys?
Currently I...

I have worked on several Wasserstroms in BP gas stations.
They use them as a condiment bar, and storage for pickles and peppers and so on. All in all not a bad system they use copeland compressors...

Had a call today for calcium deposits on the ice. Open the hopper lid ice looks good. rotate the auger nothing out of the ordinary....

I noticed the ice chute looked green. Took the top off the...

island style with 3 total levels. defrosts 6 times a day for 30 mins. I arrived on site 2 hours after the last defrost. and the clock was set fro the proper time.

defrosts at 4, 8, 12 a/p

the...

i have case set down to 28 or so on the stat to hold a mid 30 reading and i re stocked the case with product from the walk in at is at temp

She was reading off of the dial thermometers that the store puts in. Not the most accurate but that is what they use. I placed my thermometer on the top shelf near the " column" or center part where...

he disconnected the duct. and i relocated it down 4 feet or so. nothing blowing down on the case at this time

sorry some info that was forgotten
R-22 case with clear site glass running at 44psi couldnt get liquid pressure due to leaking stem on receiver..... which is going to be replaced in the morning

call came in as top shelf temping too high. other tech was out said it was because there was a register in ceiling above it and blowing heat down on it, recommended moving duct. I went there the case...