Search:

Type: Posts; User: shavedneon

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    82

    I've used one square foot per ton for a long time...

    I've used one square foot per ton for a long time without any issues. That is for straight return not filter grille, filter grille deduct for grille type restriction. Stamp face is .5, fixed bar .67....
  2. How old did the filter look? Was it dated by...

    How old did the filter look? Was it dated by chance? The installer may have taped over it during the original install.
  3. Replies
    7
    Views
    346

    I used all 4 concentrated coil cleaners in the...

    I used all 4 concentrated coil cleaners in the van mixed 3 to 1 each in succession. Not mixed in 1 concoction. And lots of water rinse and repeat. Forgot to mention .5" static when I was finished....
  4. Replies
    7
    Views
    346

    Tiny condo townhouse kinda place, one lady and...

    Tiny condo townhouse kinda place, one lady and her twenty something son living there. Must be a few packs a day each. So nasty, yet a perfume smell behind it too.
  5. Replies
    2
    Views
    89

    from Push It- Any service tech TAB or NEBB...

    from Push It-
    Any service tech TAB or NEBB certified on this site? Personally in commercial work I feel it is just a trade of it's own. You need to be either a balancer or a service tech. Not sure...
  6. Replies
    7
    Views
    146

    516651516661516671 It appears as if the filter I...

    516651516661516671
    It appears as if the filter I just found and most others that have the words upside down were designed for a down flow operation, or horizontally in a duct.
    For up flow under a...
  7. Replies
    7
    Views
    346

    Nastiest smokers unit of the season

    The entire Rheem gas package unit was so nasty, orange in color and sticky, coil was coated in tar, static was over 1"516541516551516561
    516571
    Even the blower housing was sticky and gross.
    516581...
  8. About $1100 USD for two computers complete manual...

    About $1100 USD for two computers complete manual J, and manual S.
  9. I've used wrightsoft for years and have had...

    I've used wrightsoft for years and have had really good luck with it. We've got a local requirement for the comm. side that's supplied by that jurisdiction. If you are a Rheem dealer their website...
  10. Replies
    8
    Views
    233

    I haven't seen the new Amana stuff. I did see a...

    I haven't seen the new Amana stuff. I did see a furnace last week that was only 33" tall, it was some off brand or re-branded unit, most likely a york judging by the color. Another option for a...
  11. Replies
    9
    Views
    565

    Best idea I've heard in a long time, should be...

    Best idea I've heard in a long time, should be posted in all the major papers around the world, and online.

    Sorry to hear about your friend Kefah, we wish you the best of luck, and couldn't...
  12. Hey payson, notice that guy talking ish on YT,...

    Hey payson, notice that guy talking ish on YT, misspelled PROFESSIONALISM. That's funny right there.
  13. Replies
    16
    Views
    905

    gotcha, I saw the shocker sticker (2 in the pink...

    gotcha, I saw the shocker sticker (2 in the pink 1 in the stink), but missed his broken truck nutz. Makes way more sense now, thanks.
  14. Replies
    16
    Views
    905

    I'm with you Mike19, maybe it has something to do...

    I'm with you Mike19, maybe it has something to do with the guys shocker sticker?
  15. Replies
    0
    Views
    204

    What a weird day

    Only had 4 calls today, 3 of them were frozen solid. All 3 were rheem units also.515481
    First was a gas electric split, impacted cool, pull and clean coil. Didn't take picture until it was almost...
  16. Replies
    9
    Views
    372

    What brand unit are you dealing with? Is it...

    What brand unit are you dealing with? Is it reverse flow, or are you needing one? If the Unit was an American car, and the duct work originated from the headlights, would supply be drivers side, and...
  17. Replies
    8
    Views
    669

    I saw the mantis in my pictures when I got home,...

    I saw the mantis in my pictures when I got home, never saw it on site.
  18. Thread: ?

    by shavedneon
    Replies
    8
    Views
    340

    OK, I Got- For Your Information, after a new Air...

    OK, I Got- For Your Information, after a new Air Conditioning unit install, the low side suction gauge of my manifold is showing negative ten PSI almost like it's pumping itself down. Goodman one and...
  19. fantech centrifugal fan would easily do what the...

    fantech centrifugal fan would easily do what the OP wants. i put in a 600 cfm unit for my bathroom venting and it is quieter than similar smaller cfm fans. the commercial model should work fine for...
  20. Please don't buy the largest fan you can fit, and...

    Please don't buy the largest fan you can fit, and design it yourself. The large commercial grade kitchen hoods can be 1200 CFM. Which would need a lot of make up air, to keep from removing all of...
  21. Replies
    12
    Views
    716

    The stamp face grille is the most restrictive and...

    The stamp face grille is the most restrictive and loudest, followed by the fixed bar, quietest would be the egg crate style, looks like the 1/2" grid used in commercial lighting.
  22. Replies
    8
    Views
    669

    Dangerous flue pipe

    I posted this in the "Pro" side and the more I think about it, could be very beneficial for others to know how dangerous this could be.




    At a call on Saturday and noticed the double wall...
  23. Replies
    8
    Views
    361

    The button toward the top near the clamp,...

    The button toward the top near the clamp, activated the top line of the readout, for amp draw. Button on left NCV, is non contact voltage, tells if voltage is present, top of clamp. And right hand...
  24. Replies
    27
    Views
    1,060

    I think you're referring to this video, he was on...

    I think you're referring to this video, he was on just the other day.
    http://youtu.be/jFFRpxFkpcM
  25. Replies
    4
    Views
    731

    I wonder why this had to happen?

    What could of possibly been the reason for this huge hole in the side of this furnace, they hid it with foil tape... kind of 514191514201

    I can't come up with any logical reason to cut this up.
Results 1 to 25 of 178
Page 1 of 8 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event