Type: Posts; User: sealman
Thanks for the sanity check I have read so many of these posts I am on over load.
Is there any real reason to install the HC16 over the HC10
I was told that trane was getting rid of the XL14 and that the 15 was next and that the side vent was also a problem for units that are boxed in ( near house in a corner...)
If I get a hc10 cleaner installed. will a merv 16 filter work in it.
I have heard that I should get a pre filter in front of the merv 10 or 16 to protect it from large cloging particles.
Split system -- Mis-use of term Package
Why not Lennox??
Problems or just not your favorite.
Yes dual Fuel- Propane over Heatpump
Already looking at variable furnace 95%
Is there a brand to avoid I know the Top group
Trane, York, carrier, Lennox...
2 stage cooling the concern is not enough cooling up stairs
During 1st stage doesn't the blower run at lower speed ( 50% output )
Ok - 2 stage furnace
Now the Heat pump / AC
If we go with a 2 stage first stage will only have enough air flow to cover down stairs and basement ( Path of lease resistance ) and 2nd stage will...
Looking at a Package for replacing old system.
14-16 seer / 8 hspf heat pump
95%- propane furnace
is there anything I should stay away from and what questions should I ask the contractor...
I have a 3000sq ft - 2 story with finished basement- (philadelphia )
looking at a single stage 4ton 14 seer hydrid heat pump with a Modulated gas valve furnace (propane )
Pros and cons Please