Search:

That should read .5cfm per SqFt. So you would multiply. 320*.5=160

FMC stands for Florida Mechanical Code. I referenced the ventilation table.

I would think that any negative pressure would...

That should read .5cfm per SqFt. So you would multiply. 320*.5=160

FMC stands for Florida Mechanical Code. I referenced the ventilation table.

I would think that any negative pressure would...

I saw the bottle opener the other day and the back of the package said. appropriate for the apprentice or seasoned tradesman. For some reason I though that was funny.

just seeing what happens when you add it to the bottom.

http://img107.imageshack.us/img107/5466/reliantairrev2ey3ns.jpg

I thought you link to a image in your signature. Is that not the case?

http://img107.imageshack.us/img107/5466/reliantairrev2ey3ns.jpg


I think I got it

Whats wrong?

http://img107.imageshack.us/img107/5466/reliantairrev2ey3ns.jpg


Now above should be my logo, and I should have the same logo as my signature

[Edited by dhanna on 06-14-2006 at 07:00 PM]

OK I've given this some thought. Not much just a little. If I was tasked with designing a space for and washer and dryer, and I had a client that was willing to pay, I would suggest the following.
...

I think the fear is that the rubber will catch fire. I see them directly on top of unit all the time. I don't really think it is an issue. The material probably has been selected based partially on...

No secondary drain pan? I hope you have a floor drain.

Nice concept,

First you need to find a dryer manufacturer to redesign a dryer so that it has a makeup air connection. We can't put a plenum on the back of a dryer and expect the maunfacturer to...

I know I'm bringing this thread back from the dead, but I just had to share my profile.

http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=76013874

I've been on it a week...

Forget the square inches. Don't go any more than 900 fpm for metal duct 700 fpm for flex, and 400 fpm for a filter. Unless it is large commercial equipment

Your leaks are more than likly coming from a return leak. It sounds like you are trying to trap all of the air that is leaking. That's not the way to do it. You have a air leak problem not a...

Do you have anymore information on this HEPA fliter? That should tell you the recommended FPM. What exactlly do you mean by a bypass Hepa filter?

Advanced,

I figured out it was required shortly after they started putting those plastic covers on. That was also the time the changed the model number from FV4ANF to FV4BNF. I was told it was to...

You know if you can figure all of it out and can do it right it can be very rewarding. There is a huge demand around here for contractors that have the ability and means to install commercial grade...

I wonder if this is a carrier? A few years ago they started putting plastic cover over the drain connections they are supposed to reduce air leaks, but if you don't knock out the knockout and put a...

With all of this talk about doing it right why hasn't anyone suggested calculating the required O/A and then decide whether the building needs more exhaust or less outside air.

It is a good...

Call the hood supplier. Many of them will offer design support. There is a lot of things to consider when doing a kitchen hood. Be careful and do your homework.

I have heard these people are OK to...

I George Washington Carver that invented peanut butter. While your statement is technically correct it is very misleading.

Good. I wasn't trying to offend you or anythig like that. I was just playing devils advocate. I just noticed you are in Florida. Where are you at?

Why didn't you replace the valve stem? Are you sure that the real reason you were sent there was because some couldn't figure out how to turn the faucet off? Sorry about being sarcastic, but I have...

So they probably just wanted all of the faucets to work in the same manner. Is that what they ended up with?