Search:

How about erratic operation of the bin stat or normal operation of the high pressure switch.

Maybe someone just strip the threads on the valve stem.

You are so right, yesterday a five year old shot his seven year old brother in his lower back over I guess, who get into the bath tub first .

That evap is stainless steel and is the only one you can use real ice machine cleaner to remove the rust stains. Then get them some good water filters.

That is not impossible. I had one leaking at the stub to drier body connection, it took forever to find because every time the leak detector goes off I was checking solder joint.

Wait untill you find them live wedged between the micro channel coils of the larger yorks.

May be in Japan only registered recyclers can strip any thing that has value. That is how it should be here anyway.

Why? All you have to do is install a pressure gauge with a manual reset needle. I will also place some Vaseline on the water inlet line to see if it melts.

The 90% of receiver capacity charge (-- lbs) Is in Larkin condensing unit manual .

Did he tell you what the ambient should be when doing this.

There are surface mount circuit breakers, these were mounted with two metal tabs and used by Hussmann in their condensing units.

Maybe someone found a video made in the 60s.

I can understand not seeing a toddler behind an suv but a nine year old.

Do these driers have a screen and pad on both sides?

Russell sierra units have no reciever nor head pressure control.

I said the same thing as JP ,when someone install a 5t rudd ac condenser replaced a larkin 5t ten +years ago and as of yeterday when I pass the building it was still there running I think. Guess I...

What do you think? One condenser can do it all, High,medium and low temp + multiple refrigerants.

That is what a drier that was working suppose to look like. It was asked to do more that's when the unit quit.

How Important is a Dryer? Nothing is important until you need it, now what is the purpose of a drier again.

What type of oil the system was in the original compressor? If mineral I would drain the poe from the new comp and replace with mineral then install. I will not deliberately mix those oils in large...

I would just put my recovery tank inside the bucket of water (with some ice if available) and let it the recovery machine run.

This is where the hydraulic tubing expander comes in handy.

Get someone to add a fresh air supply to your air handler and redo your dust test while the house is under positive pressure.

Why stick to "Made in the the USA". Let's make is better "Made in the USA and owned by Americans". This way we keep the profit here.

IT has something to do with the internal volume of the related parts including refrigerant, condenser design and ambient temp. There was a manufacturer with a similar design whose units also lasted...