Search:

try pressuring the unit back up and soap bubble your weld joints

PROBLEM SOLVED HAD TO RESET DIP SWITCHES. ALSO HEAT PUMP GROSSLY OVER CHARGED. THANKS FOR YOUR RESPONSES

CHECK LINE VOLTAGE POLARITY

I HAVE AMERICAN STANDARD AIR HANDLER /HEAT PUMP 16 SEER AFTER T-STAT SATISFIED VARIABLE SPEED BLOWER CONTINUES TO RUN RAMPED DOWN FOR SEVERAL MINUTES AS MUCH AS 20 MIN ISW THIS NORMAL?

freemind you dont seem to have a clue your state of mind way out there have you led a shelterd life it seems to me if everybody is out to screw you the i suggest you consult a priest or mental health...

6"down 4"up

this kit comes from trane this is not an after market fix . this is what trane sells to twin their furnace again pt#baytwin400a

:cheers:

you can buy trane twinng kit pt#baytwin400a consists of 1 sequencer and relay cost is 29.95 online

hang in there .like you i began my career not knowing squat.i rode with techs who taught me tons about the field peaking my intrest.then came school graduated 3.75 gpa twenty years later i find my...

odds are a stuck fan relay on control board disconnect hi voltage to motor and check with meter.

allways works for me

a techumshe model aea4440yxa is a 134a compressor should fit your needs

you need to address sealing seams and points of air and moisture infiltration .there should be no way that moisture should seep thru

went on a service call about 2yrs ago customer took 1soaker hose and coiled it around condenser coil then wrapped a 4in thick foam rubber piece around the entire coil then coiled another soaker hose...

sureley you jest airflow thru the front of the unit is little to none causing high head pressures

gotta love planned obsolecence

not so rare thats why you look inside unit for factory installed driers .takes a few minutes longer. saves a call back and a frustrated customer.

this is just temporary right? til the right replacement could be found ?

good GOD at least your guy had the good sense to correct the flaws of the weak minded

do you mean ranco small gray box with dial for coolers ?

check LRA if its close replace compressor start components check for acid in system and nuetrilize accordinly acidaway and hh suction sucton drier

are they still employed? in business remember this is what makes the rest of us that care look great

thats why they put the info on the3 data tag . its a starting point.also the EPA REQUIRES A LOG OF REFRIGERANT USED AND SOLD

20 yrs and still learning something new everyday.