Search:

The machines never fill up. they don't make big enough ice to. there not but a year old and this has been a problem since they were put in. they use to make good size ice before they left the panels...

I have a account with two of these double stacked and they say that if they put the front panels on them they freeze up solid. So they leave them off all they time. Which that doesn't work either...

With all that has been said . It still is better than working on restaurant eqipment.

hearthman do you have any brands or websites you suggest

I am building a house and want to put a good wood burning fireplace in it. dont know much about them so does anyone have favorites that they think are good options

I have a set of the hilmors. Less than a month old and the micron gauge has quit working, it won't calculate subcooling on 22 and the hook is falling off. I did talk to the rep for hilmor and the are...

I have seen this happen before, but it just split the carlyle down the middle around the oil pump. the valves were closed on it so I guess the only thing to do is leave the discharge valve cracked

you can try to use some hardcast butyl tape. it has worked for me in the past. depending on how bad the box is

Well i would go with CPC but you already knew that:grin2:

I can't believe POPE brought up Steve Esslinger. I guess he has worked everywhere.

see if you can find out more about this system I would like to know.

he's right I have heard of the subcooler leaking into another rack. Also put a balloon on the pop-off.

Ive had the same problems at wal-mart. people before me looking for a leak with a H-10. Get yourself a TIF ZX and go try again . If you don't find anything start punching holes in the armaflex in the...

i have had some problems with Brainerd remanufactured comps. they seem to have a lot of vibration

i have a G5 just make sure you use a big extention cord. or it will burn up the motor.. i lost two that way

try lightbeam they are in it also

when you pump oil into that fitting above the pump it actual fills up the back of the comp around the motor windings. there is a sep hole into the crank case but it takes a while, which it looks...

ya'll just remember its all about the money, more hours more money

what are you talking about comstock the guy is working on a rack not a AC

should still have model number on a brainerd tag. should be something like 06CY337

what is core product temp?

we are getting rid of ours, nobody was supposed to go down there anyway. But it was a good place to cool off.:D

R-507 will run lower head

thats is some nasty stuff when you get it on you. the only thing I use it for is to coat gaskets

sorry I didn't realize you where as old as this unit. You must be the only living person thats seen one new:anyone:

hey if you think you can do better come on then redneck

ther are no traps the compressors sit under the evap

could be airflow but I have no idea what it should be. Can't find any info. evap and blower not dirty just cleaned it. It has one of those evaps that you can't hardly stop up that is the round...

that was my question all along. I've been working on this thing for about a year but the unit is about forty to fifty years old. not sure if it is supposed to run this way

ther is only one return and it is in the wall about 4x6 foot

hey poodle head it could possible be a model - TSSU-27-08 sounds like one I've been working on. mine is 134A

I use the cans all the time for small charges. use an R-12 can piercing tool and put a zip tie around it to hold it from leaking your going to ues the whole can anyway

the closest is about twenty feet and the farest is 100

if you could get the stores on a cleaning schedule they would'nt have this problem. good luck

there is no return air duct work it draps straight into the unit

just washed the evap and it has new belts. not sure what the airflow should be on this unit can't find any info

its R-22 and I just wash the condensers

working on an old carrier unit split system with two condensers on roof and two O6Ds that sit under the evap. model number 41D24-A109. each comp has a 30 pound receiver on the roof coming out of the...

your right smilies I was miss infomed. they no longer make or service the old rc spectrums with the key pad and are not making lingo after all the stock ones are gone but still servicing for now, but...

NOVAR no longer sells or rebuilds the old rack controllers and now
they quit making Lingo.

If you know anybody that rebuilds rack controllers - let me know.
I have about 10 bad ones.

have yall heard that honeywell is replacing novar with OPUS

what exactly do you mean by air & surface products

i see no way you can run coil temp above freezing and maintain product temp

worst I"ve ever seen

as far as copeland i dont think they require it. it mainly comes with new carlye comps

trane man try going trough motion industries

I've been using R-414b hotshot it works fine and you can put it in on top of the 12

If I was you, I'd put propane in it:eek:

the best i have used is the tek mate. it is cheap about $120 and picks up better than the dek tek select. plus it just takes regular C batteries so you don't have to charge it. i have had mine...

I want to know what the pressures were running