Search:

Type: Posts; User: timetable15

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    13
    Views
    1,563

    18 plus 9 equals more than 24 there not gonna...

    18 plus 9 equals more than 24 there not gonna work when you hook both of them together
    learned that the hard way had 4 units that was slightly over btu rating of condenser asked the rep at supply...
  2. check compressor terminal connections had same...

    check compressor terminal connections
    had same issues a while back ended up being one of the spade connections was loose causing it to go out on overload
  3. Replies
    102
    Views
    13,721

    traced it with silver sharpie and used a box...

    traced it with silver sharpie and used a box cutter to cut the foam
  4. Thread: Pipes!

    by timetable15
    Replies
    18
    Views
    4,011

    70 to 80 percent are failing most likely due to...

    70 to 80 percent are failing most likely due to not pressurizing the tank that is more important than position if u have 70 to110 lbs street pressure and do not fix that u have a tank with 38 lbs on...
  5. Replies
    102
    Views
    13,721

    So can the fieldpiece

    So can the fieldpiece
  6. Replies
    102
    Views
    13,721

    Ya actually it is its about a 1/4 inch over line...

    Ya actually it is its about a 1/4 inch over line ill remove some see how it does
    thx
  7. Replies
    102
    Views
    13,721

    Question last time i used my pump i had a little...

    Question last time i used my pump i had a little bit of oil coming out of the exhaust
    is that the check valve going bad
  8. Replies
    102
    Views
    13,721

    Drop isopropyl (rubbing) alcohol into the opening...

    Drop isopropyl (rubbing) alcohol into the opening of the SVG2 sensor and pour it out. Leave the sensor opening uncovered long enough to completely evaporate all of the residual alcohol. Do not use an...
  9. Replies
    102
    Views
    13,721

    From the instructions on fieldpiece gauge after...

    From the instructions on fieldpiece gauge after cleaning it let it air dry
    i add the alcohol let it sit and turn it upside down give it a little shake and put it in the sun to dry it out
  10. Replies
    102
    Views
    13,721

    It's isopropyl that i use that what fieldpiece...

    It's isopropyl that i use that what fieldpiece said to use to clean it
  11. Replies
    102
    Views
    13,721

    Ya i order the nylog and keep the alcohol in the...

    Ya i order the nylog and keep the alcohol in the truck i clean the sensor every couple of uses
  12. Thread: Pipes!

    by timetable15
    Replies
    18
    Views
    4,011

    Im chill good info

    Im chill good info
  13. Replies
    102
    Views
    13,721

    Yes i used a silver sharpie to trace the tools

    Yes i used a silver sharpie to trace the tools
  14. Replies
    102
    Views
    13,721

    Believe me the tools are real maybe if i even...

    Believe me the tools are real maybe if i even thought twice about the comment i would retake it and show a receipt
    Maybe it was the lighting and definitely would not waste the time to photoshopped...
  15. Replies
    102
    Views
    13,721

    Thx appreciate the knowledge Knowledge equals...

    Thx appreciate the knowledge
    Knowledge equals $$$$$
  16. Replies
    11
    Views
    2,470

    Burnham makes a good oil boiler My old boss was...

    Burnham makes a good oil boiler
    My old boss was excellent with oil he said the crowns arent that good as far as oil goes something with them sooting up to easy
  17. Replies
    102
    Views
    13,721

    Ya everybody keeps talking about the bluevac...

    Ya everybody keeps talking about the bluevac maybe next big job ill buy it and compare it against the fieldpiece
    Thanx for the input and what tee fitting should i ask for so i can compare that...
  18. Replies
    102
    Views
    13,721

    Ya i hear on bumping it thats why i got the case...

    Ya i hear on bumping it thats why i got the case it goes on the pump and right off into the case if the tree becomes a problem i will get the tee fitting you are talking about but so far down to 300...
  19. Replies
    102
    Views
    13,721

    Hvaclover in the vacuum setup there is two core...

    Hvaclover in the vacuum setup there is two core removal tools like u said two 3/8 by 1/4 vacuum hoses and a tree that tree is a solid piece of brass it has one more connection for the gauge at the...
  20. Thread: Pipes!

    by timetable15
    Replies
    18
    Views
    4,011

    And about the expansion tank failing most of...

    And about the expansion tank failing
    most of them fail because the factory charge of 38 psi needs to be adjusted to incoming street pressure which nobody does and u have a bladder that is expanded...
  21. Thread: Pipes!

    by timetable15
    Replies
    18
    Views
    4,011

    The honewell amx requires no heat trap which...

    The honewell amx requires no heat trap which means u dont need that mess of piping maybe u should do some research before u go rambling about something being easier
  22. Thread: Pipes!

    by timetable15
    Replies
    18
    Views
    4,011

    most of the piping is due to the mixing valve...

    most of the piping is due to the mixing valve they need a heat trap any state facility requires mixing valves on the heaters so nobody gets burned
    the watts mixing valves are a pain in the butt...
  23. Replies
    102
    Views
    13,721

    Havent used the bluevac everybody raves about it...

    Havent used the bluevac everybody raves about it on here my supplier carries fieldpiece and yellow jacket i try to buy my tools from them cause there is no hassle when there is a problem haven't had...
  24. Replies
    102
    Views
    13,721

    cases by source check them out they have...

    cases by source
    check them out they have everything you could possibly need reasonably priced too
  25. Replies
    102
    Views
    13,721

    i dont and like knowing the job is done right

    i dont and like knowing the job is done right
  26. Replies
    102
    Views
    13,721

    yellow jacket makes the setup the tree with the...

    yellow jacket makes the setup the tree with the gauge mounts to the vacuum pump two 3/8 by 1/4 hoses go from the tree to the core removal tools and the 3rd 1/4 hose goes from the extra tapping on the...
  27. Replies
    102
    Views
    13,721

    vacum setup

    299811
    just purchased setup about a month ago used 5 times all down to 500 microns within 5 min and down to 300 within 15 min well worth the money
  28. Replies
    28
    Views
    3,915

    good catch medic

    good catch medic
  29. Thread: insulation

    by timetable15
    Replies
    1
    Views
    1,183

    insulation

    299651Moved three condensers today and the homeowner said the downstairs unit never worked that good. I told him i would look into it.
    This is what i found it has been there for 9 years and the...
  30. Replies
    11
    Views
    2,686

    i guess the good old days of a torch,solder,and a...

    i guess the good old days of a torch,solder,and a set of skills are long gone
  31. Replies
    28
    Views
    3,915

    at the bottom of the riser

    at the bottom of the riser
  32. Replies
    15
    Views
    3,197

    plus there is 2 less joints and the money saved...

    plus there is 2 less joints and the money saved on the ell plus ss
  33. Replies
    15
    Views
    3,197

    Buy the yellow jacket worth the money

    Buy the yellow jacket worth the money
  34. Replies
    10
    Views
    1,359

    Liberty Model 405 1/2 hp Commercial Drain Pump...

    Liberty Model 405
    1/2 hp Commercial Drain Pump
    I use it for washer machines slop sinks etc only problem it needs to be vented you can run the vent up to the roof with the drain or considering its...
  35. Replies
    17
    Views
    3,506

    relief valve should be piped 6 inches from ground...

    relief valve should be piped 6 inches from ground or at least face it down so when it goes off it doesnt hit someone in the face
  36. Replies
    21
    Views
    4,152

    vent is in the wrong place

    vent is in the wrong place
  37. try using a brass nipple the threads have a finer...

    try using a brass nipple the threads have a finer edge to them
  38. I would be looking at what udarrell said what is...

    I would be looking at what udarrell said what is the blower cfm per ton
    you said the air flow has gotten significantly stronger which leads me to belive that compared to the old system's cfm per...
  39. Replies
    35
    Views
    6,532

    that monstrosity must have been cycling on high...

    that monstrosity must have been cycling on high limit constantly
  40. Replies
    13
    Views
    3,251

    one other thing i find most people miss thermal...

    one other thing i find most people miss thermal expansions tanks only come with between 30 and 40 pounds of pressure in them due to shipping reasons you need to charge the tank with a compressor to...
  41. Replies
    13
    Views
    3,251

    expansions tanks can be installed in any...

    expansions tanks can be installed in any direction
    more importantly they need to be installed on the cold water line that one looks like its on the hot side of the tank
    to many times i see them...
  42. Replies
    5
    Views
    872

    goodman...... you get what you pay for

    goodman...... you get what you pay for
  43. Replies
    12
    Views
    1,388

    Keep your head high and stay strong.Positive...

    Keep your head high and stay strong.Positive thinking works wonders.My buddies uncle beat cancer 13 times over a 25 year period.You will be in my prayers
  44. Replies
    12
    Views
    1,388

    my mother and my younger brother have diabetes...

    my mother and my younger brother have diabetes its a slow killer.Sorry to hear about the bad news stay strong and my prayers go out to you
  45. Replies
    17
    Views
    5,398

    yellow jackets tool is designed for the 410a...

    yellow jackets tool is designed for the 410a flare.Samsung ductless instructions talk about the difference of the flare.The flaring tool is worth every dollar it has multiple sizes and set the depth...
  46. Replies
    38
    Views
    3,232

    Is the piston the correct size?

    Is the piston the correct size?
  47. Replies
    38
    Views
    3,232

    yes your right

    yes your right
  48. Replies
    38
    Views
    3,232

    title of post was backwards from what it stated...

    title of post was backwards from what it stated in post
  49. Replies
    38
    Views
    3,232

    wouldn't amps be low if the valves are bad

    wouldn't amps be low if the valves are bad
  50. Replies
    38
    Views
    3,232

    read again it says high suction low head

    read again it says high suction low head
Results 1 to 50 of 134
Page 1 of 3 1 2 3
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event