Search:

Type: Posts; User: anasmilbes

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Thanks everyone for the feedback. Ive removed...

    Thanks everyone for the feedback. Ive removed Solenoid and wired to shut condensing unit off. i was able to add more charge without changing head pressure too much. Hope it works.
  2. Replies
    12
    Views
    723

    If everyone did a good job, there wouldn't be...

    If everyone did a good job, there wouldn't be much work for us good guys
  3. If i decide to go the receiver route i will...

    If i decide to go the receiver route i will probably just double my capacity 24lbs vs 11.7 and take out old receiver and put new one on outside. 2 will look stupid to me. seems like I'm asking to be...
  4. Ive ran a smaller unit for 2 cases same length...

    Ive ran a smaller unit for 2 cases same length and didn't have any issues. You've seen this before?
  5. Outdoor unit.

    Outdoor unit.
  6. Id like to see a pic for future reference. ...

    Id like to see a pic for future reference. Wouldn't even know how to size or pipe the thing.
  7. Exactly why i don't want to go the route

    Exactly why i don't want to go the route
  8. LMAO hahah Sorry guys been swapped with calls...

    LMAO hahah

    Sorry guys been swapped with calls left and right. Im going back Thursday to remove LLSV and add a little bit of Freon.

    To answer some questions

    System is brand new. Evacuated 3...
  9. So its okay to have receiver outside condensing...

    So its okay to have receiver outside condensing unit?
  10. Sorry 11.3 its TEHA020E6

    Sorry 11.3 its TEHA020E6
  11. 11.7 @90%

    11.7 @90%
  12. Right before T on first case

    Right before T on first case
  13. Problem is, Trenton builds their units pretty...

    Problem is, Trenton builds their units pretty tight. Dont have room inside unit. Only option would be outside unit which i dont like
  14. High-side 248 psi Low-side 60.2 psi 75 degree...

    High-side 248 psi Low-side 60.2 psi
    75 degree ambient
    during pump down climbs to 340 right before it shuts off on LP

    Evacuvated system 3 times. got down to about 800 microns (I know 200-500 is...
  15. Bought condensing unit ready to go. Weighed in...

    Bought condensing unit ready to go. Weighed in initial charge 12lbs. System starving, continued added and pumping down every couple pounds to insure HP switch doesnt go off during pump down
  16. @90% 11.7lbs. I have a 60ft line set run, 1/2...

    @90% 11.7lbs. I have a 60ft line set run, 1/2 Liquid 7/8 Suction. reduced at cases to 3/8 liquid. Pump down is another issue. If i ever needed to pump down i would be screwed. I would most likely...
  17. One inside case before lines going to evap....

    One inside case before lines going to evap. Customer doesnt want to spend more money. One of those just bandaid it customers
  18. Undersized Liquid Reciver..........Help!!!!!

    I have a Trenton TEHA020 Condensing unit that feeds to 3 Kysor Warren cases (2 five doors, 1 three door). According to my calculation condensing unit is not undersized. about 21% over whats needed in...
  19. Wow that's one old video. Very informative...

    Wow that's one old video. Very informative nonetheless. I've always set it up with LLSV but have a couple guys arguing about best way.

    I also, run into a lot of bad LP switchs so had me thinking
  20. Thanks for the replies. So I shouldn't worry...

    Thanks for the replies. So I shouldn't worry about LP failing?
  21. Proper way to wire single circuit condensing unit.

    Ive been having a lot of he said this and he said that talks with other techs. Thought id ask here.

    What is the proper way to setup a condensing unit that controls one circuit?

    Setup 1- Wire...
  22. I would ask for at least an amount to cover...

    I would ask for at least an amount to cover parts. because half might not cover parts.
  23. Replies
    12
    Views
    743

    Had same issue. Installed check valve at...

    Had same issue. Installed check valve at discharge. Problem solved
  24. :eek::eek: lol "Never Let The Weak Dilute...

    :eek::eek:
    lol

    "Never Let The Weak Dilute Your Mind"-Anonymous
  25. I would understand a weeknd call and that much...

    I would understand a weeknd call and that much driving.

    I just watched 20/20 a couple weeks ago and they made seem as if $130 for something small was a rip off (loose fuse). I don't want to be...
Results 1 to 25 of 97
Page 1 of 4 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event