Search:

Type: Posts; User: pairman

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    13
    Views
    2,144

    I've been on my own for 12 years now specializing...

    I've been on my own for 12 years now specializing in restaurants. I went door to door with cards and flyers describing services. After 3 weeks worked no less than 40 hours/week and have not looked...
  2. Replies
    13
    Views
    1,836

    a picture would be helpful

    a picture would be helpful
  3. Replies
    13
    Views
    4,023

    Probably the spark module is going bad

    Probably the spark module is going bad
  4. Replies
    18
    Views
    2,311

    It would be nice if you had a model and serial#.

    It would be nice if you had a model and serial#.
  5. Replies
    17
    Views
    1,808

    P70AA-118 opens when pressure drops. You have a...

    P70AA-118 opens when pressure drops. You have a fan cycling control. When then pressure rises the switch closes to energize the condenser fan. As the pressure drops then the switch opens and the...
  6. Replies
    11
    Views
    5,250

    Check the burner tubes and the flue, make sure...

    Check the burner tubes and the flue, make sure there is no blockages.
  7. Thread: Rational ovens

    by pairman
    Replies
    5
    Views
    2,051

    They have a DVD available for purchase that has...

    They have a DVD available for purchase that has all their manuals.
  8. Thread: Cooltube

    by pairman
    Replies
    10
    Views
    1,280

    I've dealt with them before. Durable and well...

    I've dealt with them before. Durable and well built. Won't succumb to corrosion from food vapors over time like others. Axial fans on the end it they go bad - simple to replace. Movable vents to...
  9. I can't recall the number of times I've heard...

    I can't recall the number of times I've heard that.
  10. Replies
    4
    Views
    590

    In that model 1 compressor handles both the...

    In that model 1 compressor handles both the hopper and barrel. Is refrigerant leaking past a closed solenoid valve or is the valve stuck/coil voltage not dropping out.
  11. Thread: Yellow Flames

    by pairman
    Replies
    12
    Views
    3,096

    yes

    yes
  12. Replies
    15
    Views
    1,814

    Not all but many mfrs sell it as an assembly.

    Not all but many mfrs sell it as an assembly.
  13. Replies
    15
    Views
    1,814

    In situations like that I always recommend buying...

    In situations like that I always recommend buying the suction line/cap tube assembly from the mfr. Sized correctly and pre-soldered.
  14. Replies
    5
    Views
    700

    I've worked on their equipment and toured their...

    I've worked on their equipment and toured their facility. They custom make equipment for many chains. What's your question or concern.
  15. Replies
    2
    Views
    3,917

    I'll bet it's the water level sensor. It's...

    I'll bet it's the water level sensor. It's inexpensive enough. They could look good and still have a small amount of resistance between probes. It's a fairly common problem with those units.
  16. Replies
    2
    Views
    917

    Thanks but that's a parts breakdown. I'm looking...

    Thanks but that's a parts breakdown. I'm looking for a service manual.
  17. Replies
    2
    Views
    917

    Berkel PM20 Service Manual

    I need a copy of a Berkel PM20 service manual. Anyone have a copy?
  18. Thread: Need parts

    by pairman
    Replies
    4
    Views
    551

    What parts do you need. Many parts are available...

    What parts do you need. Many parts are available at many suppliers.
  19. Thread: Truck Stock?

    by pairman
    Replies
    7
    Views
    1,353

    Don't stock but use one every 5 years or so. ...

    Don't stock but use one every 5 years or so. Depends on the equipment your customer has.
  20. Replies
    10
    Views
    2,150

    I agree with Jackinthebox......

    I agree with Jackinthebox......
  21. Replies
    3
    Views
    966

    McCall is now owned by Delfield. They can help...

    McCall is now owned by Delfield. They can help you out. 800-733-8829 and ask for tech support.
  22. Replies
    10
    Views
    2,150

    Possibly a bad thermocouple/thermopile. Have a...

    Possibly a bad thermocouple/thermopile. Have a professional check it out.
  23. Replies
    15
    Views
    1,346

    It's grief dealing with them if you have any...

    It's grief dealing with them if you have any warranty issues.
  24. Replies
    7
    Views
    711

    I've cleaned many a blower wheel (light...

    I've cleaned many a blower wheel (light commercial rooftop) and have had substantial improvement in airflow and comfort.
  25. Replies
    1
    Views
    1,664

    It sounds like you did all the right checks. And...

    It sounds like you did all the right checks. And yes, that part is called the thermostat.
  26. Replies
    37
    Views
    3,638

    Poll: Had Digicool for 6 years now. Not one problem...

    Had Digicool for 6 years now. Not one problem after all these years. Everyone talks about other brands with problems BUT they have great customer service. Does that really help if you have a...
  27. For whatever reason your start circuit is not...

    For whatever reason your start circuit is not dropping out immediately after starting. Either miswired or bad relay.
  28. Replies
    12
    Views
    2,482

    Possibly contaminated oil in system. Maybe needs...

    Possibly contaminated oil in system. Maybe needs an oil change or new compressor. I would also blow out the lines on the condensing unit to flush out gunk.
  29. Replies
    0
    Views
    1,528

    Vitality Express II Juice Dispenser

    Does anyone have any programming information for Nestle Vitality express juice dispensers that are used in Bob Evans? I need to make some temperature adjustments.
  30. Replies
    7
    Views
    761

    On the nameplate for the refrigerator there...

    On the nameplate for the refrigerator there should be information on refrigerant charge. Of course you need to find the leak and fix it. Probably have to add access fittings and a drier. Pull...
  31. Thread: Yellow Flames

    by pairman
    Replies
    12
    Views
    3,096

    How did you clean it? Sometimes you need to get...

    How did you clean it? Sometimes you need to get in with a brush or blow it out with CO2. Somehow you need to get more air mixed in with the gas.
  32. Did the motor sucking air in have power. If it...

    Did the motor sucking air in have power. If it did the motor is bad. If it does'nt have power check your controls. It may be wired for a 2nd fan to come on with pressure or ambient temp controls.
  33. Replies
    18
    Views
    2,370

    Well said

    Well said
  34. Replies
    9
    Views
    1,406

    It sounds as if this was a mfr warranty call...

    It sounds as if this was a mfr warranty call under 1 year. I would use 134a for that reason plus the unit was designed for that. the only time I use other refrigerants is when they've been phased...
  35. Replies
    4
    Views
    1,270

    It's your left front axle forbisher rod

    It's your left front axle forbisher rod
  36. Replies
    4
    Views
    1,270

    Fuse, circuit breaker, bad thermostat, bad...

    Fuse, circuit breaker, bad thermostat, bad contactor, broken wire, freon leak. Could be anything without additional information. Call a licensed contractor for a proper diagnosis and repair.
  37. Replies
    18
    Views
    2,370

    Also brazing is different from soldering and you...

    Also brazing is different from soldering and you also need to pull to a vacuum before recharging with refrigerant. Of course there are details like a new liquid line drier?
  38. Thread: captubes

    by pairman
    Replies
    4
    Views
    656

    Only if the specs are the same as OEM

    Only if the specs are the same as OEM
  39. Replies
    6
    Views
    845

    What kind of glycol did you use. Different...

    What kind of glycol did you use. Different manuafacters use different types. And some are premixed and some are not. Check with the equipment mfr.
  40. Replies
    9
    Views
    2,471

    1 air leak is 1 too many. It brings in warm,...

    1 air leak is 1 too many. It brings in warm, moist air and wastes energy. 45 minutes on defrost is too long. Warms up too much and then when it kicks on it refreezes on the ceiling. The defrost...
  41. Replies
    6
    Views
    1,117

    I agree with Gib's Son. You need to have the...

    I agree with Gib's Son. You need to have the system professionally designed. We also need the whole picture. What are the 3 - 3ton units doing. Also exhaust fans and makeup air need to be...
  42. Replies
    29
    Views
    3,964

    You say you keep adding refrigerant to the system...

    You say you keep adding refrigerant to the system and keep adjusting the TXV. If you can't get the proper superheat you may want to replace the TXV and liquid line drier. Fill to a full sightglass...
  43. Replies
    7
    Views
    765

    Remote condenser gets power from remote circuit...

    Remote condenser gets power from remote circuit from the ice machine itself. It should NOT be on a separate circuit.
  44. Replies
    18
    Views
    1,948

    Parts are also available from refrigeration...

    Parts are also available from refrigeration hardware supply.
  45. Replies
    12
    Views
    2,107

    I love the appion pump. more expensive but oil...

    I love the appion pump. more expensive but oil changes take 5 seconds and they work great.
  46. you can put 300lbs of nitrogen through a cap tube...

    you can put 300lbs of nitrogen through a cap tube and while it may not be plugged it could still have a restriction.
  47. Replies
    16
    Views
    3,322

    I ususally get some scrap cardboard and cut me...

    I ususally get some scrap cardboard and cut me out a nice, neat new fan shroud.
  48. The reset control has what is called heaters. ...

    The reset control has what is called heaters. They may be weak with age and needs replacing.
  49. Replies
    4
    Views
    1,521

    Do you have a model# ?

    Do you have a model# ?
  50. Replies
    21
    Views
    2,669

    A year ago my beer taps used to freeze over. One...

    A year ago my beer taps used to freeze over. One day it became warm and I had someone take a look at the system. He flushed/filled the glycol and replaced the glycol pump.



    I was refering to...
Results 1 to 50 of 111
Page 1 of 3 1 2 3
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event