Search:

Thanks Guys! We decided to bid it as if we were replacing the WS just in case. Sounds like we shouldn't have to, but nothing like a little CYA.

Just got out of prebid meeting license said
<feature name="brand" accept.station.in="*" accept.station.out="*" accept.wb.out="*" brandId="FacExp" accept.wb.in="*"/>
Locked? I'm thinking yes.

Anyone know any problems if I try to put a Talon Network Manager on an existing FX workstation and network?

Licensing issues with workstation is main fear.

Guys,
I have a school that has Andover Native BACnet controllers in 17 of the new classrooms. We just took over the rest of the school, ver. AX 3.6.31 and I am trying to talk to these controllers...

We simply take the Schedule into a boolean select and define outputs of select.

Look at where the jobs are going to be. I drove my own car for 1 year and quit the company. I got $600 per month + $.50 per mile over 500 in 2 week period. Not worth it put over 70K on my car, now...

Found it Sorry. The jumpers enable biasing resistors and I was searching Biasing voltage. Need more coffee.

For whatever reason, I cannot find the documentation on how to configure the jumpers on J6 on a JACE 600 to apply biasing voltage to the RS-485 port. I have done it before but now can’t find it...

Well said berg

Create the input, then, as berg suggested, go to define hardware and assign to input.

And yes it is mandatory.

You have to have CCT

If not do a search for .caf.module

In CCT they are located C:\Documents and Settings\All Users\Application Data\Johnson Controls\MetasysIII\CCT\UI\Custom Control Modules

Or it could be Duct static sensor location in relation to return air path. Just a thought.

I have seen this once before and found that the return fan riser opening (Plenum Return) for the floor that the sensor was located on was right by the static sensor, with the return fan tracking the...

Sorry for the delay been buried with service calls. The controllers are not that old maybe 6 months. It’s a Steafa Jace. What points should I be looking for? I don’t see anything that would...

I have a job with 2 JCI LX –VAV controllers on a Jace (AX) along with Circon, and Steafa VAV’s. The contractor that put the LX-VAV’s on the system did not give the user the ability to override the...

Found the issue. I had them defined as network setpt's. Changed them to Network Inputs and they are exposed for connection. Thanks.

I have a small stand alone job with three BACnet Spyders, one for AHU, and the other two have 3 reheat zones each. I am trying to keep this stand alone and the only thing that needs communicated are...

1. What percentages of jobs have included Modbus?
0%


2. What percentages of jobs have included Lonworks?
25%

3. What percentages of jobs have included BACnet?
75%

Thanks that’s what I was thinking but could not remember for sure.

I put the freeprog on and didn’t have any issues. I put the .jar files on the Jace and did nothing in the workstation but pull the points up. They can’t use the wizards from the workstation I have...

Has anyone successfully integrated to a Staefa Smart 2? I did it in R2 when with Staefa rep. but have not in AX. I’m just starting to search for drivers, .jar files, and a communications gateway....

I'm putting a LX 300 on a Steafa Jace as soon as it comes in I will let you know if there are any issues.

I just looked up what I had on my Jace that I upgraded the 500.
Ax 3.2.16
Bcs 2.7.1
dcDevices 2.7.1
dcMain 2.7.1
lonDistech 3.99.1
lonworks 3.2.20