Type: Posts; User: kirkH
There is an enum point in kit control.
Set it to auto.
I've noticed the "made in the USA" controllers we had to get from Honeywell for ARRA projects say assembled in Mexico. I guess the word made means different things when you can afford to hire the...
XL10's are configurable so you can't customize the internal programming.
With something like that I would probably set the DO as a free output and do the logic in Ax.
If you don't have enough straight duct up stream, you can have too much turbulence at the sensor and see this type of issue.
I think the big question is: do you really want to go down the Spyder hole?
There will be an integration module between the asd buss and the micro net buss for the vav's, I believe one for each 31 mn devices. It's been awhile I don't remember exactly what everything is...
I didn't know they made plenum rated OSB.
I just tested one of these on the bench that I condemned in the field. Works on the bench, I think maybe the little selector switch wasn't quite lined up just right, not sure. I don't get a warm...
I've had some luck over the years cleaning boards with distilled water and a toothbrush. All it takes is a little crust or whatnot to short across a couple traces. If it was underwater it may have...
That would be me. After looking at this thing it occurred to me that I never gave much thought into how something like this was being controlled back in the day when I was a service tech. Dusting...
It's all going to be managed by the BAS we are installing, just trying to nail down the best control scheme for the DX.
Thanks for the replies, it's a multizone all new VAV's, DAT will be reset based on demand we will control econo also. Hot gas is already piped also not sure it is really needed but I'm sure we will...
We've got this old building we are retrofitting, the existing Trane air handler with 2 Carrier CU's is staying. Don't have M#'s not sure it would matter after 20 years of hackery not much is...
Maybe something like this would help http://workaci.com/products/arm-analog-re-scaling-module
Why was I expecting to find a joke here?
you will have oil return problems if you try to run a compressor at less than full speed.
A DP switch wired to an indicator lamp of some sort would work.
Looks a little dry.
You answered your own question already....just use Firefox
Not if they are thinking clearly.
You didn't mention where you are located,these guys http://www.hvacx.com/ might be of help.