Search:

Two outside. One to take in air. Another to release air.

OK. I went back and checked the temps between Nov. 24th and Dec. 29th for 2009 and 2010. The average temperature in 2009 was 32.1 degrees and the average in 2010 was 27.0 degrees. The model of the...

Home built in 1966.
Furnace from 1966 (60% efficient).

In 2010, I had some pros install a Lennox G61MP (95% efficient) to replace an old Lennox 60% efficient furnace. It seems like the house stays a little cooler than normal with the heat, but it was...

I saw this today and thought you guys might like to see it.

Seriously, Twilli, what are you using? I'm in the 313 and I'd really like to know what a 419er is using because we see the same crap weather. It's raining right now over here.

HVAC Professionals, please let us know what brand/model of furnace & AC you have. Do you have zoning? What extras have you included for yourself? What brand/model thermostat are you using? Are...

I know what it is.....Garbage.

If that's true, then you can save more by getting the equivalent Century or ComfortAire furnace. They're the exact same thing as the Ruud/Rheem. They're made in the same factory. Look into it.

Let me ask you: do you like the heat/ac in the house? What's bad about your furnace/AC?

I'm not a pro, but a family friend of mine is. He said that though he does do a manual J, a little oversizing isn't bad. For instance, in Michigan, the winters are more harsh and older Detroit...

I'd like a see a newer Goodman GMVC video posted online. Further, if you someone could post one for a newer AC, that would be great as well. I'm about to buy a house this year and the first thing...

You've done a great job. What models are the furnace and AC? Also, I'd like to know if you have any video you can post on youtube. There's a gang load of Goodman bashing videos on there that show...

Bring someone in from Windsor. They'll take care of you.

The way I see it, there shouldn't be anything wrong with using Trane. My mother has a house that's had a Lennox in it since the 60's. Last year the blower motor finally went out and this year the...

I'm not a pro, but I've been here long enough to know that the problems don't usually stem from the manufacturer, they usually stem from the installer. The install is key. I've also heard a lot...

I know about how an ECM variaable speed blower motor will use about the same amount of energy as a 100 watt light bulb. I'd like to know how much energy the normal blower motors use. I have a new...

Dude, find a competent dealer who can get a hold of ComfortAire or Century brand furnaces. They're nothing more than a Rheem/Ruud and you'll save money. That's just my take on it. We have a new...

That Twilli guy is in Toledo. Maybe he can make a trip. He seems to be respected in these forums.
OR
You can go with the guys at Airtronic in Redford, MI. I think their number is (313) 537-8111....

Our GlowCore AC still works fine:

http://imgur.com/NX0Sn.jpg


Twilli3967 knows his stuff. Twilli, have you looked into Heat Controller Products? They're nothing more than Rheem/Ruud furnaces...

I think he should try General Aire. They're pretty good.

OK. Here are the numbers. This is only the "Gas recovery" part of the bill.

December Bill: 250 CCF @ .78
March Bill: 148 CCF @ .755

So I ended up knocking 40% off of my gas bill, but keep...

Heck, it doesn't do anything for the ones that are still open. I was shopping for a contractor and I told one company to call me back. I found out they had an F BBB rating, so I told them and they...

I am saving money. On average, we were paying about $315+/month for gas. I had the furnace installed mid March and the last few days in March were fair weather. For the month of March, we're...

OK, well that's out the window. I was able to get a RTH7600D for a great price because they mistagged the item at home depot. I won't give the exact price, but it was at least 10% off the lowest...